Canvas Side Curtain Frame

[Mike K]

Jim

As far as I know, the two rods ( about 3/8" diam. from memory ) are shaped with a crank handle shape on the end ..this end has a tapered square section that fits into the two fittings in the door tops . The door top fittings have a square shaped hole in them - the holes are located 90 degrees from side on, that is, standing at the door, looking across the cab to the other door, the square shape looks like a diamond ..hope u understand !

Not all of the vehicles had the snaps to hold down the lower edge of the curtain. The original side curtains I have here , do not have any snaps on them at all. The NOS doors I had didnt have any snap fittings on the either.
Mike