post war flathead

[Jordan Baker]

HI Kevin

Hope your eye heals well and quickly.

As for your starter removal. Ive only ever heard of 2 bolt ones. I just checked some online Flathead sites and they all show 2 bolts also. These should be two that run the entier length of the starter. You don't need to remove them completly. I found when taking my starter out of the engine while still in the UC required to come out on an angle. I wonder is the little gear is somehow jammed in behind the flywheel gear.

Yes it is a pain to reinstall but its easy to do. I just used my fingers to get the bolts started then they hold the weight of the starter itself. Not to sure why you would need to pry with a tool. To me that says a bolt is still holding it in.

[RichardT10829]

Kevin your not going to like this but i whole heartidly advise you pull the engine out, i have been down this road with rally x engines and you always end up A) breaking something B) hurting yourself.

for what it takes i would hoist her out matey that way you can get up close to the engine and have a good look.

out of curiosity why are you pulling the starter out ? this may have some bearing on why it wont let go ?

hope you get her sortid matey.


Rich

[Keith Webb]

Originally Posted by Jordan Baker

HI Kevin

Hope your eye heals well and quickly.

As for your starter removal. Ive only ever heard of 2 bolt ones. I just checked some online Flathead sites and they all show 2 bolts also. These should be two that run the entier length of the starter. You don't need to remove them completly. I found when taking my starter out of the engine while still in the UC required to come out on an angle. I wonder is the little gear is somehow jammed in behind the flywheel gear.

Yes it is a pain to reinstall but its easy to do. I just used my fingers to get the bolts started then they hold the weight of the starter itself. Not to sure why you would need to pry with a tool. To me that says a bolt is still holding it in.

The bolts of course run through the length of the starter motor. There is also a tab on the upper one which is secured to the engine with one of the sump bolts, so that's possibly the third attachment Kevin mentions.

[Ledsel]

Yes that could be it. I is hard to notice if your not familiar with it.