Dummie’s guide to carrier steering and brake adjustment please

[Big D]

Hi Ron,

Thanks for the reply. I have an Australian carrier.

Removing the whole assembly is also my preferred option but how to do it is the problem. I can't reach the fixing screw for the left side clevis, let alone the nuts which secure the bolts on the left side of the large underside cam plate.

Is there a secret to how to access everything that I am missing?

That is why I wondered if just undoing the four bolts which secure the plate holding the cam shaft might be enough. I figure if I was able to at least drop this plate out I could fit a suitable spacer on the cam shaft to raise the profile of the cam a little.

My size is probably not conducive to that wee gap in the right crew area.

Cheers

Darryl