Dummie’s guide to carrier steering and brake adjustment please

[colin jones]

darryl, if by raising the cam by 2-3mm can fix it then I would do it as it will not effect the operation of the machine. The cam sits on a thickish washer above the bearing so it is possible the washer was removed some time ago. I have had the same problem before and by raising the cam solved the problem for me.
Colin.

[Big D]

Hi Colin,

There is a washer under the castellated nut on the top but no washer between the bearing and the pivot pin. That seems to me to be the easiest fix as well - just a suitably sized washer fitted between the pivot and bearing.

Thanks

Darryl