#1
|
|||
|
|||
tool kits for Cmp
hi there.
Does any one have a list and or a photo of what a complete set of tools and accessarys were issued with these trucks.Those issued with a c8ax would be extra good .Thanks David |
#2
|
|||
|
|||
Tools
David
have a look at the photo, I'll try and find the list to go with it Pete |
#3
|
|||
|
|||
Tool list
David
List of tools as follows (source Chevrolet spare parts list 15cwt 4x4 august 1943): Jack Handle Jack Block Jack Box Metal tool Box Metal (with bulbs and fuse) Box and lamp assembly metal Box metal (for blackout equipment) Box metal (with spark plugs) Hammer 1 ½ lbs Ball Pain Pliers combination 7 Driver screw 4 Driver screw 10 Wrenches set of double end as follows: 3/8-7/16, 7/16-1/2, 1/2 9/16, 9/16- 5/8, 5/8-3/4, 3/4-15/16 Wrench adjustable 8 Wrench adjustable 12 Wrench spark plug Wrench Cylinder head bolt Wrench Wheel Handle wrench wheel Punch solid Chisel flat cold 3/4 File half round Handle file Tape 1/4 lb roll 1/2 adhesive Wire #20 gauge soft copper Wire soft steel 1/4 lb Gun assembly grease (Alemite plunger type) Gun assembly grease (leaver type) Gun and hose assembly (squirt) Can oil 1 quart Can water 2 Gallon Can petrol 2 Gallon Brush engine cleaning Funnel assembly Gauge tire (Schraeder) Extinguisher fire (1 Quart Carbon Tetrachloride) Lamp assembly Inspection (12 lead) Bucket canvass Shovel Axe and handle Cutters wire Matchett 15 blade Sheath matchett Tool set for runflat tires Iron Tire 15 1/2 Tool tire valve removing Pump assembly tire (Foot operated) Tire chains 4 off Tow rope (1/2 cable) Shackle (tow rope) Chain assembly (tow rope) Note the starting handle (Crank hand) is not included in the list, hope this is of some use Pete |
#4
|
||||
|
||||
Pete,
Thanks for the photo and list of tools! As a matter of interest, Colin has a picture of the tools on his CMP webpage as well. Now, who has a complete set of tools for his CMP?!? Regards, Hanno |
#5
|
|||
|
|||
I am hoping to access a copy of the tools - pics and list. I have the tool box, but specific tools from the right period are needed. If anyone can help, as the links above no-longer work
Cheers George |
#6
|
|||
|
|||
Quote:
I can't help with the list, but these photos have been gathering dust on my computer for quite a while. Apologies, but I can't remember where I nicked the black & white pictures from. Owen.
__________________
1940 11 Cab C15 1939 DKW KS200 1951 Willys M38 1936 Opel Olympia MVPA # 39159 MVT # 19406 |
#7
|
||||
|
||||
There is also THIS THREAD. Can always add to the information and examples there.
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should! |
#8
|
|||
|
|||
Tool stowage
I too have been collecting the necessary tools for my F60S LAAT. Spanners and other hand tools are not very difficult to find at autojumbles but the part numbers can be confusing as a number of different spanners have the same Ford part number.
I am lucky enough to have the correct tool box as my Father picked it up in Egypt during the war. Questions: 1. where is the jack stowed in the F60S? 2. where is the tool box stowed? Behind the passenger's seat are four tapped holes in the floor board that are spaced tantalisingly correctly for the fitment of a frame to hold the box. Would this be correct? Kind regards Alastair F60S |
#9
|
||||
|
||||
Quote:
__________________
You can help Keep Mapleleafup Up! See Here how you can help, and why you should! |
Thread Tools | |
Display Modes | |
|
|