|
|
|
|
#1
04-08-09, 07:55
|
|||
|
|||
Sand blasting media
This is what my truck sleeper look's like .No dust ,no leaks .Very portable .My 27 cu ft doesn't run half the time . I use my shop vac with a long hose so I can put it outside the shop so it is quiet .and if there is dust comming out of the vac it doesn't matter as the vac is outside .
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank 
|
|
#2
10-08-09, 04:58
|
|||
|
|||
|
Truck sleeper cabinet and media
Are you sure you didn't steal that from some hospital nursery ward?
The gun community rarely sandblasts any gun parts, but they do need to vibrate and clean cartridge cases. The standard media include walnut shell pieces, corn cob pieces, apricot pit pieces and white rice. The latter surprised me, but anything that is hard surfaced and slightly textured seems to be required. Somebody lately found a supplier of hard plastic beads at his wife's craft supply store. He claims they work like a charm. I don't know how any of this is going to flow through a nozzle, but it is the thought that counts. Cleaning regimes for cartridge case tumblers usually include some form of chemical rejuvinator and household dryer softener sheets. The mesh turns filthy and the media gets cleaner.
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us!
|
|
#3
10-08-09, 05:22
|
|||
|
|||
|
Sand blasting media
When I was looking for a box to make this I stumbled into this sleeper and I can tell you there isn't one on the market that will work as good as this one.The total price was $300 which makes it even better. I can change the beads to other material by opening the bottom to clean it out .Very pleased with the results.
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank
|
|
#4
25-08-09, 23:40
|
||||
|
||||
|
A couple of weeks ago my neighbour with the Dodge bought a sand blasting cabnet and complained he couldn't see into it. I printed this thread for him and he bought an extraction fan. KP always buyes the best he bought a dust extractor that collects the heavy particles for reuse. He thanks MLU for the help.
__________________
Robert Pearce.
|
|
#5
30-08-09, 06:20
|
||||
|
||||
|
Quote:
Could you please identify if the extract was one of the ones mentioned in this thread? Also what the make of the extractor was; where it was bought from and what it would have cost? Also, more importantly is he going lend it to you every now and then? Thanks Kind Regards Lionel
|
|
#6
30-08-09, 14:11
|
||||
|
||||
|
Hi Lionel,
It is a dust extractor fan designed to collect sawdust off docking saws. It was bought from Total Tools in Wagga and was around the $500 mark. I don't know the make but I can check next time I drive past and KP is home. I don't need to borrow it as I just use creek sand and blast in the paddock and the wind clears the dust. 
__________________
Robert Pearce.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
