M151A2 door mounting?

[super dave]

Thanks for the pictures Paul, You have a nice looking MUTT there. I look forward to the pictures of the horizontal and vertical rods and some measurements if possible.

Dave

[paul53]

Hi Dave, Thanks she's a fun buggy to drive around

Here's a few shots of the left door frame mounted, I'll PM you the measurments for the rods, but you can kind of see how it works from here. Because I removed the CDN roll bar I'm using the U.S. top system, but I also can use the CDN doors, I have other verticle curtain rods made due to the iniside door closer using the roll bar to keep the doors closed.

As for the verticle curtain rod , it's 3/8 rod with a 12 inch long 1 inch wide flat bar welded to it. I ran out of room for pictures on this post so i'll put more on the next. There is also a horizontal rod from the windshield to curtian rod for door opening

I have enough items to make it look U.S. or back to stock CDN , the fender mirrors I removed but have them still as well as the grill/screen guard.


I did dig out a N.O.S. olive drab set of doors and curtains from when I purchased them last year, so i'll PM you on that idea if your intrested.

Paul

[paul53]

Dave, here's a few more pictures as well as the skins. I'll draw up the measurements tonight and PM you.

hope it all helps

Paul

[super dave]

Thanks Paul for the pictures as they help a great deal. Looking forward to your PM regarding the door, side curtains and the measurements.

Dave