|
|
|
|
#1
07-12-09, 02:49
|
|||
|
|||
Hi Martyn I was thinking of doing my MK2 up as a wasp.It has the hole cut in the center plate for one and I have the tank for a Wasp M11c .The one that goes across the back .I will have to make the rest of the parts . Have you got the book by Roger V Lucy , isbn 978-1 894581-49-3 .I picked up one while in Toronto . Nigel Watson's Volume 2 has some good information on them .My buddy said Make it shoot water .great for parades
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank 
|
|
#2
07-12-09, 12:07
|
|||
|
|||
|
Info
I have a book on one of the carrier/ flame thrower variants.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#3
07-12-09, 17:19
|
|||
|
|||
|
I have nigels book it shows a lot of photos and i have located the carrier in delft museum that i am planning to visit to get more detailed photos. Thanks for the isbn number for the book will order one asap, there is a chap over here from a LRD group who has made a jeep with the kit on it i have tryed to email him but it has fell on deff ears i would think he has the molds to make more. i have a few drawing for the mk2c with the tank on the rear but i prefer the tanks inside.
|
|
#4
07-12-09, 19:19
|
|||
|
|||
|
Go on the internet and log in" Wasp Flame throwers" and there is alot of sites .I see the jeep on War wheels .net Gives the owners name and a good picture .There is a wasp in the war Museum in Ottawa .What we need is good drawings and spec's george
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank
|
|
#5
07-12-09, 23:01
|
|||
|
|||
|
here is a link for you to check out www.lrdg.org/DRNews11Acrobat.pdf
its about the the chap and the wasp jeep.
|
|
#6
14-12-09, 05:43
|
|||
|
|||
|
WASP parts
The Canadian War Museum had a pallet with about three flamethrower "guns" in addition to their complete WASP which is on display. I am note sure of the model but believe they are vehicle mounted types. I took some photos. MAYBE they would agree to some sort of a trade for one? The CWM staff are still on strike I believe (December 2009) ...
__________________
Colin MacGregor Stevens, CD Richmond, BC (Pending) 1971 M38A1 CDN3 CFR 67-09062 VIN 100293 Ex-3rd Fd. Sqn. RCE @ CFB Chilliwack; then BC Regiment (DCOR) Recce Jeep; then 6 Fd. Engineers. (Service history to be verified) Website: www.CaptainStevens.com YouTube Channel: CaptainStevens
|
|
#7
14-12-09, 19:22
|
|||
|
|||
|
Thank's Colin I contacted them and got a reply that they were having staff problems and would get back to me as soon as possible . I didn't think about them having a strike. That would be great if I could get some of these parts .
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
