|
|
|
|
#1
09-12-09, 16:37
|
||||
|
||||
Richard. If your water pump is anything like the ones on my Autin Tilly and Morris PU. Then they have a ceramic gland seal. I have only ever found one firm able to restore them. give me a shout if you need details. Ron
|
|
#2
09-12-09, 20:24
|
||||
|
||||
|
Quote:
Thanks for the reply ( also to Radek), but that was a post I put up 5 years ago ! I got over the cam follower problem, a very good company down your way made an excellent job, Cox & Turner. The pumps do have rubber seals, the ceramic or carbon seal is the dynamic part, there has to be a rubber seal to seal between shaft and back of the carbon disc, much the same as a Bedford 28 hp pump. Cannot even recollect where I did get the seal from now  regards, Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#3
09-12-09, 20:38
|
||||
|
||||
|
water pump
here are scans from maintenance manual and list of spare parts for K30, it is the same.
__________________
____________________________ Austin K30 1940 Austin AP8 1940 Austin 10hp G/YG "Tilly" Royal Enfield WD/CO 1942 British airborne trailer family Austin K2/Y Ambulance 1939 Austin K30 1940 Austin Champ 1954 ...
|
|
#4
09-12-09, 21:14
|
||||
|
||||
|
Quote:
Radek, The item, 2H2799 is the rubber seal that seals the carbon to the shaft. I was able to find one from another make of engine, but as it was 5 years ago, I do not remember now, but do know it seals perfectly. Thanks for your input here.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
|
#5
09-12-09, 22:03
|
||||
|
||||
|
water pump
you are welcome
 My little Austin books collection. 
__________________
____________________________ Austin K30 1940 Austin AP8 1940 Austin 10hp G/YG "Tilly" Royal Enfield WD/CO 1942 British airborne trailer family Austin K2/Y Ambulance 1939 Austin K30 1940 Austin Champ 1954 ...
|
|
#6
09-12-09, 22:48
|
||||
|
||||
|
Oh blimey Richard! I just followed the thread without looking at your post date. Yes I know Cox and Turner well. Old school machinists. They have helped me out quite a few times. They are currently working on a Harley XA crank for me. Ron
|
|
#7
09-12-09, 23:54
|
||||
|
||||
|
Quote:
 Not to worry Ron. When I saw my thread on the "New posts" tonight, I could not think what it was about. It is surprising how many old posts to come to the surface again.
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
