C15A air filter on carb too large

[Phil Waterman]

Hi

Looking at Bobs photo there are some differences from the one on my `45 HUP and `42 Pat 13 C60S. I believe that these two had their original air cleaners. primary difference is that both of mine attach to the Carb via a center bolt down into the carb.

Now my `41 Pat 12 C60L the air cleaner body attached to carb via the clamp as shown in Bobs photo.

I'll take some photos and measurements and post them.

Attached photos are of the original air cleaner from the `42 Pat 13 C60S. It is 8 3/4in Diameter Top 7 in Diameter Bottom and fits a carb throat of 2 5/16 OD.

I'll also do some looking in the CMP parts book and the Commercial Maple Leaf Truck Parts book to see if I can find a cross over.

Cheers Phil
Cheers Phil