|
|
|
|
#1
20-05-10, 13:42
|
|||
|
|||
thanks guys!
|
|
#2
21-05-10, 23:59
|
|||
|
|||
|
well today started out good , i got most of the front bumper straigth and i fiddled with detail while the body filler/primer/finishing putty dried, up until the day turned shocking, geez i still have a little cramp in the arm, the compressor plug decided it was time to burn out, it took the end of my heavy gage extension cord with it, stupid me picked it up and got buzzed pretty good, lucky enuf i did not get harmed, but i did loose some time fixing the damage and some cash, i ended up almost finishing the bumper
any how here are the pics of the day , enjoy! prep on the rear shock  i guess they are monroe!  this is where i was at with the bumper when the shocking part of the day occured!  the responsible for the shock!  fixed up the damage, it wasn't easy finding a socket to fit such a big extension!  and this is where i left the bumper for the week end , monday i should be able to paint it! 
|
|
#3
26-05-10, 23:06
|
|||
|
|||
|
well it finally stop raining so i got the 52 move out of the back yard and next to the fence, it was one hell of a redneck move....lol
here are the pics enjoy!ohh and a video hovering truck!  truck on the move! http://s298.photobucket.com/albums/m...ete2010033.flv new spot  close up of redneck transport  axle on the way!  truck is moved! 
|
|
#4
27-05-10, 23:41
|
|||
|
|||
|
well today i finally got the bumper ready for paint! 3 day of sanding...few i hate body work...lol... and i got some prep work done on the remaining rear axle bolt and some of the shocks
anyhow here are the pictures of the day, enjoy! shock ready to be prep  rear axle nut ready to paint  bumper ready for paint!  shock ready to sandblast  shock hardwre taken off the shocks 
|
|
#5
29-05-10, 03:32
|
|||
|
|||
|
well today not much done, i frigged around with some more of the shock attachement, all 4 shock are ready for primer, i found some serial number on the front one, imagine they where not as disposable as the one of the present days are, a serial number they must have been made to last, and one of them has the serial number 574! wow early in the production run! i also got bot rear shaft sand blasted and ready for prime.
anyhow , here are the pics of the days! enjoy! shock hardware again  shocks and shaft ready for primer  serial 574!  and serial 5124! 
|
|
#6
31-05-10, 23:50
|
|||
|
|||
|
well today i got some olive paint on and i got the shock hardwar ready for paint, mixed up a batch of paint and i ran out before everything was painted ....arg .... ill have to mix an other batch tomorow and get the rest of the stuff painted , after that everything will be primed or black until i paint the whole truck darn it!!!
wel here are the picture of the day,enjoy! shock bracket have to be sanded and sandblasted  after about 6 or 7 hour of labor those shock hardware are ready for paint!  bumper and bud rim lock painted!  rear shaft are etched  painted the rear bumper and shock but ran out of paint and will have to finish tomorow or later  spare rim painted and bottom of the knuckle  tryed getting a tire on and i quitted , they will be going to the tire shop tomorow!look at the gap betwen the rim and the lock! 
|
|
#7
02-06-10, 03:01
|
|||
|
|||
|
well today was a rainny day i got the tire to the tire shop and was able to get two mounted , the paint took a beating on the rims but hey what can ya do? we also had a cool find , we found two casing of 5.56 mm bullet in one of the tire! i also got the two tire that where installed grooved .
anyhow here are the pics of the day! enjoy! tires installed  grooved!  and the bullets!  
|
|
#8
24-07-10, 05:41
|
|||
|
|||
|
heehe today i was back at it for a few hour and it is now an official rolling chassis!
happy day!   
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
