![]() |
|
#1
|
||||
|
||||
![]() Quote:
cheers jaap
__________________
1940 chev C15 cab11, MCC wirelessbody No1 MK3. ![]() ![]() |
#2
|
|||
|
|||
![]()
Thanks very much for the photo, Jaap!
Been out of pocket for the last few weeks on a vacation with my daughter in Colorado. After the family fun was over, it was time for me to have a little fun of my own... Still lots of old iron to be found. Am trying to locate the owner of this very nice GP Jeep in New Mexico. It was for sale, but the sign had rotted off the windshield and the phone number was unreadable. The AFKX 352 I have known about in Wyoming for a few years now, but it was a little pricey, and would take a low-boy equipment trailer to move legally, so I decided to pass it on to a man with the money to do it up correctly. Found it's sister in an old scrap yard the next day. They were both apparently used as rural school buses in the area years ago. I have a friend trying to deal with the eldery lady who owns the yard, so we'll see what happens. Picked up this very straight 1.5 ton ex USAF Chev, but had to leave it in Nebraska. Will probably go back for it later in the summer. Also found this modified T-16 and several half tracks in Nebraska, so will try and find out more information on these when I return to the area. Thanks, David Last edited by David DeWeese; 27-03-11 at 15:31. |
#3
|
|||
|
|||
![]()
Hi,
Received a set of nice toggle switch plates and a dash jewel for the C8 from Brian Asbury, (thanks again, Brian), and found a set of suitable ball-end toggle switches from the local hardware store. After looking through some cab 11 dash photos, I have a question about the order of the switches. I placed them as "instrument", "tail" and "stop", but would that be the correct order for a cab 11? Thanks, David |
#4
|
|||
|
|||
![]()
...picture taken at Coe Hill in 2005...... although truck had termianl cancer the interior still showed a good instrument/switch layout..... now this is a C8 and maybe different for a C15a.....
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#5
|
|||
|
|||
![]()
...so which one to believe....
This one is from my own cab11 C15a..... First is STOP..... second is TAIL... and the 3rd one is a double sided swithc with a neutral in the middle labelled INST........
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#6
|
|||
|
|||
![]()
Thanks a lot Bob for the photos!
I'm going to go with the switch order on your truck in the second photo as it looks to be unmolested. Wonder why the three position switch on the instrument lights? Someone spent a lot of time and effort labeling all the controls in the first photo. Enlarged the photo a bit and it looked like the first toggle switch was labelled "heater"? Couldn't make out the others. Thanks again, David |
![]() |
Thread Tools | |
Display Modes | |
|
|