|
|
|
|
#1
06-07-10, 15:12
|
||||
|
||||
I used the 50 x 27 x 110mm bearings as the 40mm ID bearings were so expensive, i have machined spacers to go onto the axles so will post up on my thread in due course, if the bearings are the same as on yours (as mine) i can provide you with the dimensions if required.
Cheers Richie
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
|
#2
08-07-10, 06:00
|
||||
|
||||
|
Early pattern
Hello again. Yes the parts books describe the Scout as having the early pattern wheel bearing and seals, but of course (apart from the british idlers) the rest of thge roadwheels are Australian pattern, as are the bearings and seals.
I will liaise with some of the local carrier restorers to see what they did with their roadwheels. Cheers Phill
__________________
Ford GPW Jeep USMC Ambulance Willys MB Jeep Daimler Ferret Mk 1 Daimler Ferret Mk 2 Land Rover S2A Field Workshop Land Rover S3 FItted For Radio x2 Land Rover Perentie GS (SASR) International No 1 Mk 3 2.5 Ton 4x4 International No 1 Mk 4 2.5 Ton 4x4
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
