|
|
|
|
#1
18-08-10, 07:58
|
|||
|
|||
Well done Lew. Sorry I cant help, but someone surely can.
The neighbours will be impressed! These pics are just enough to annoy you.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... Last edited by Lynn Eades; 18-08-10 at 08:05. 
|
|
#2
18-08-10, 10:03
|
||||
|
||||
|
cant help with the Aus Pattern bulkheads but if you need a canadian / British one let me know hehehehe.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#3
18-08-10, 10:19
|
|||
|
|||
|
cheers Lynn most helpfull
Cheers Lynn, the photos will be good for when I get around to the rear, sorry I wasnt too clear as its the measurements in the plate right behind the driver, Ive worked out the rectangular ones and have got a rough idea on the size of the holes but then again the more I poke the one I have the bigger it gets, size at the moment approx 28mm, also having a crack at adding photos
Lew
|
|
#4
18-08-10, 11:50
|
||||
|
||||
|
Hi Lew and welcome. I hope this pic is of help. If you need more let me know.
Colin.
|
|
#5
19-08-10, 09:47
|
|||
|
|||
|
Cheers
thanks Colin,just what I was after, are the measurements from the side of the panel to the edge of the hole or to the center?
Lew
|
|
#6
19-08-10, 11:01
|
||||
|
||||
|
Hi Lew, the first measurement is from the edge of the bulkhead to the centre of the hole.
Colin.
|
|
#7
19-08-10, 11:06
|
|||
|
|||
|
thanks
Beauty, cheers Colin, Im off to cut some holes, will post some photos soonish of my handywork.
Lew Last edited by Lew Skelton; 19-08-10 at 11:06. Reason: spelling mistake
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
