|
|
|
|
#1
10-01-11, 21:45
|
||||
|
||||
ditto.... i should have said earlier. cheers Ben.
Shaun you must know folk with carriers (that have no pintle mounts)
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
|
#2
11-01-11, 13:26
|
|||
|
|||
|
Hi Ben
I would be interested in a full set as well please. Thanks for the invitation regards Paul
|
|
#3
11-01-11, 19:16
|
|||
|
|||
|
Pintles?
Just how many is a full set?
Would they not be cheaper made out of some other metal? What about machining and the lever section? Well done Ben for taking the lead. Barry
|
|
#4
11-01-11, 19:40
|
||||
|
||||
|
i beleive it is 4 (on a mk1 General Purpose carrier) one behind the drivers head on the center bulkhead, one on the drivers side armour, one on the rear armour and one on the top of the engine cover.... there may be more but i think that is all i have seen thus far.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
11-01-11, 21:05
|
|||
|
|||
|
Numbers
Yes it is 4 for a Universal Carrier MkI*
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#6
11-01-11, 21:27
|
|||
|
|||
|
They probably would be cheaper in another material but as I'm going to the trouble of making a new pattern I thought I'd make them as the original, brass. I think some may have even been bronze!! The lever is included in the price but is steel.
There are two flat steel leaf type springs behind the lever to help the mechanism, I'll include drawings for those with the castings. I didn't include all the machining in the price as I wanted to keep the basic price as low as possible but I have enquired about it and may perhaps offer it at an extra cost. I didn't want people feeling they were being charged for things they didn't want. A couple have asked for machining as they want a part ready to bolt on, others have said they can do it themselves. If I offered castings all finished including the springs etc they would be much more than the £45 (approximate) price originally quoted. I'm not making money on having them cast or covering my costs this is the price the foundry have quoted. Thanks for the interest, I think doing small projects like this helps as many as possible but shares the cost fairly? Ben
|
|
#7
12-01-11, 05:34
|
||||
|
||||
|
AS per my PM
Hello again Ben,
Yep put me down for three raw castings! And a great many thanks again Phill
__________________
Ford GPW Jeep USMC Ambulance Willys MB Jeep Daimler Ferret Mk 1 Daimler Ferret Mk 2 Land Rover S2A Field Workshop Land Rover S3 FItted For Radio x2 Land Rover Perentie GS (SASR) International No 1 Mk 3 2.5 Ton 4x4 International No 1 Mk 4 2.5 Ton 4x4
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
