cleaning grease from hubs

[Hanno Spoelstra]

Originally Posted by andrew honychurch

I like the idea of the putty knife to get the worst out and then MK1 finger to get out the rest before a solvent wash.

Andrew,

I used wooden paint stirrers (the ones you get for free when you buy paint) to scrape out the grease. Set up the drum over a plastic oil changing tray. Use a spray can with brake cleaner/degreaser and an old brush to clean off the remains, this drips into the tray. If you take your time, your hands will not get that dirty.

HTH,
Hanno