Grenade Boxes

[rob love]

Originally Posted by kevin powles

Robe, That felt pad on the lid, the carrier parts book only lists those two screws as 1/4 long, enough only to secure the wood in place, if there is no glue perhaps there is some of those split rivets there as seen on other boxs?.

No rivets...just the plywood, the felt, and two screws going through the plywood and into the felt. The screws on this box are round head, and would appear to be original. The wood is just under 6mm thick, so it would have been 1/4 inch in regular talk.

If I were a betting man I would say it was glued at one time, but 70 years and insects have removed any trace of it.

[kevin powles]

I can confirm after stripping out an original drivers Mk1 stowage bin and detaching a rusted out drivers grenade box, there is no wood packing between the bin and the box, also the four fixing bolts, the top two bolt heads go in from the grenade box side and the bottom fixing bolt heads go in from the ammo bin side.

kev.

[shaun]

so you have started stripping out the new toy then Kevin ! When are you going to start a thread for it and post some photos

[RichardT10829]

you not been roped in yet Shaun.... looks like I am going to be a busy bee this coming easter hahahahaha

[kevin powles]

Shaun, My misses has the camera, my brother has took alot of pics of some interesting areas yesterday and today, I have the pick up truck loaded with all the mortar carriers suspension and parts off the new one including your trailing arms to get them blasted. will take them over tomorrow. I need to get it stripped and in zinc primer to preserve it as soon as possible. I will get the mortar carrier running before rebuilding this one. On monday I finished the missing conduit on the Tank hunter, rewired the main starting cables and put on a new starter motor and changed out the drivers side fuel tank and put in the rear convoy bracket and light. I will start stripping the new carrier out tomorrow, every nut will need grinding off, I have alot of missing bits on order from Brian and Stuff ordered from John at Midwest.

Kev.

[Lynn Eades]

Bloody f)#$@* thread jackers!!! .........

By the way Kevin, the split rivets are called "bifucated" rivets from memory.