![]() |
|
#1
|
||||
|
||||
![]()
Thanks Robin- No photos on their site, And a search here turned up nothing. Hopefully they will get in touch.
f Gilles and Carol(e) have one just across the border in Cantley PQ.
__________________
Charles Fitton Maryhill On., Canada too many carriers too many rovers not enough time. (and now a BSA...) (and now a Triumph TRW...) |
#2
|
|||
|
|||
![]()
Charlie..
here is a good mule web site..About 1/2 way down the page it shows two guys with a mule and a 106MM Recoiless rifle on it and the guy that is posing with the RC rifle would only take one shot like that...shit come out both ends of those baby's and the trigger man would be fried by the back blast..but it is a good site.. neat Little machine.. http://www.m274armymules.com/mule_history.htm
__________________
Alex Blair :remember :support :drunk: |
#3
|
||||
|
||||
![]()
Hi Guys Sorry I have been out of the link and thanks to my son Alain I am Back. here are some pictures of our Mule. It is a M274A5 with quad steering. This is a great little vehicle, we use it for all kinds of things such as hauling parts, towing Carolle's M38A2 or just playing in the snow. As someone said these are expensive vehicles, the one we have cost us $6500 USD, we bought it from David Kelone in the US. He has all the parts and when he sold it he gave us extra parts such as plugs, points etc.
This vehicle will be going to all the shows this summer. We have modified a 3/4 ton trailer to haul it behind our CUCVs or it will fit in the back of a pickup with a 6ft box. |
#4
|
||||
|
||||
![]() Quote:
is that a 6' or 8' bed needed on the pick up? Do you back it on with foot basket facing toward the rear and overhanging the tailgate? (Is the tailgate up or down with this hauling method?) a photo would be nice! (really hope its a 6') Bryan
__________________
Bryan Michenfelder, C.D. M274A5 Mule w/4 Wheel Steer, electric start. Blacksmith Welder (Pipe) Machinist Stationary Engineer Production Supervisor Reenactor (Not bad for a aging fat man) ![]() ![]() Armatus Et Ebrius |
#5
|
||||
|
||||
![]()
http://www.merrickvillemotorpool.com...ruck_field.jpg
http://www.militarytrucks.ca/Images/.../M274_Mule.JPG links to pictures from Merrickville Motor Pool Looks like electric start with charging system and 4 wheel steer.
__________________
Bryan Michenfelder, C.D. M274A5 Mule w/4 Wheel Steer, electric start. Blacksmith Welder (Pipe) Machinist Stationary Engineer Production Supervisor Reenactor (Not bad for a aging fat man) ![]() ![]() Armatus Et Ebrius |
#6
|
||||
|
||||
![]()
When we got our Mule we had a Ford F150 with a six foot box. You need to load the Mule with the engine next to the cab and the steering towards the rear. Also the tailgate stays downs and to compensate for the weight on the tailgate you should have 2 2x6 ft boards 8 ft long and park the mule on the boards , this will distribute the weight on the bed and lighten the load on the tailgate.
When I picked mine up from Dave Kelone he had ramps to load the Mule. Gilles
__________________
I like what I do and I do what I 1986 Iltis (Carolle's) 1986 Iltis x 6 For Sale |
#7
|
||||
|
||||
![]()
thanks for the info Gilles, ok so take 2x 8`2x6 (or wider)
to help with load distribution and ramp it in with hand controls, got it.
__________________
Bryan Michenfelder, C.D. M274A5 Mule w/4 Wheel Steer, electric start. Blacksmith Welder (Pipe) Machinist Stationary Engineer Production Supervisor Reenactor (Not bad for a aging fat man) ![]() ![]() Armatus Et Ebrius Last edited by The_Stainless_Steel_Rat; 20-08-12 at 16:31. |
#8
|
|||
|
|||
![]() Quote:
|
#9
|
|||
|
|||
![]()
Now I recall the Australian army having some of these, at least we got to the stage of doing trial loadings in a Boo and C130.
I wonder if it was a one off evaluation machine or did we actually use them. Regards Col
__________________
Vietnam Vet and proud of it. |
#10
|
|||
|
|||
![]()
Col,
Pretty sure there is at least one Mule here, at the Bandiana Army Museum. Did a quick check on there website, but it is not shown. Rich.
__________________
C60S Austin Champ x 2 Humber 1 Ton & Trailer |
#11
|
|||
|
|||
![]()
Could have been one we borrowed from Vietnam
Col
__________________
Vietnam Vet and proud of it. |
#12
|
||||
|
||||
![]()
Actually there were trials done on the Mule in Australia in the early 60's, I found an interesting article on these trials. Basically the Mule was well liked, but the trial authorities gave it a bad report because of the tip over problem. It was found that at high speeds the vehicle had a tendency to flip over while pulling a sharp turn especially to the left where the driver sat especially loaded with a high center of gravity. During the trials a driver was killed when the vehicle flipped over. If you receive the MVPA magazines there was an article on the Mule last year in the Military Vehicle magazine and it talked about the trials.
Also Mules were used by the Aussies in Vietnam. |
![]() |
Thread Tools | |
Display Modes | |
|
|