Wanted: 8' CX-4720 Cable for the VRC-20

[Bruce MacMillan]

Hi Scotty,

Are you daisy chaining two RT524s to make a VRC49?
The CX4720 has a 4 socket connector on one end and bare wires on the other.
The CX4721 is used to connect two MT-1029s together but the cable is only 2.5 ft long.

Just checking before I go digging through the junk box.

Bruce

[Scott Bentley]

Originally Posted by Bruce MacMillan

Hi Scotty,

Are you daisy chaining two RT524s to make a VRC49?
The CX4720 has a 4 socket connector on one end and bare wires on the other.
The CX4721 is used to connect two MT-1029s together but the cable is only 2.5 ft long.

Just checking before I go digging through the junk box.

Bruce

Bruce,

Your right. Jon Skagfeld my friendly Toaster Tech called me and sorted me out on the Cable Configs. Yes, it is in fact a 4721 I need. Did they make these in any shorter lengths? All I can find are either 14 or 18 footers.

If an 8' footer was around, that would be great. Failing that, I have a link for a 10 footer.

Thanks

Scotty

[Scott Bentley]

The Cable with these ends:


Its going from MT-1029 to MT-1029:


Looking again today after work, i'm thinking I may actually need a 10' footer afterall. I know Jon, I know

Scotty