|
|
#1
03-04-11, 05:29
|
|||
|
|||
new guy
Hi all. Just want to say how glad I am to be on this forum.I have a MKII carrier that I have been working on over the winter.I have no shop space indoors so I have been working on small stuff during the winter.I have the engine,clutch and trans. all overhauled and ready to go except for paint.Now I am starting on the hull and suspension.There was some extra stuff welded on ,that I have cut off so far.All the upper armor is gone.My rad is 100% ! so says the rad shop.Most of the wheels are shot but the tracks and sprockets are OK.I drained the oil out of the diff. and there was no water at all so that looks good to go.I'll include some pics if I can.
Looking forward to learning more about carriers, as there is so much experience and knowledge here! http://s352.photobucket.com/albums/r...Carrier006.jpg http://s352.photobucket.com/albums/r...Carrier001.jpg http://s352.photobucket.com/albums/r...rrier010-1.jpg http://s352.photobucket.com/albums/r...Carrier069.jpg http://s352.photobucket.com/albums/r...Carrier070.jpg http://s352.photobucket.com/albums/r...Carrier021.jpg http://s352.photobucket.com/albums/r...Carrier045.jpg I hope these links work,I have many more pics, but chose the most revealing ones. 
|
|
#2
03-04-11, 09:53
|
|||
|
|||
|
Welcome
Hi Dave and welcom to the Forum, many thanks for the excellent pics that you posted, It will good to watch your progress over the cominig months, this is a great hobby and we are preserving history, keep us posted, regards Ron
__________________
Ron Winfer
|
|
#3
03-04-11, 10:58
|
|||
|
|||
|
hi dave
welcome to the forum, it's a nice project you've got yourself there and although there's a lot of armour to be fabricated it looks as though you have most of the small difficult to find parts already supplied with it. good luck with the resto eddy
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#4
03-04-11, 11:45
|
||||
|
||||
|
Dave you have all the right bits thats for sure... that box on the rear deck i believe is the original one off the rear armour..... i recognise this carrier ? is it the one from ww2talk ?
Cheers Richie
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
03-04-11, 13:27
|
|||
|
|||
|
Threaded cap..
Quote:
Welcome to the forum..You are in the right place.. I noticed a yellow arrow pointing to a cap on the front plate..That is an access hole for the engine crank..a long one..that goes into a notched pulley on the end of the engine crank,shown in picture #Viewing 10 of 68..It should have a threaded brass cap on it... I'm pretty sure ..I'm going from memory on that but some one will know.. Anyway it looks good..  
__________________
Alex Blair :remember :support :drunk: Last edited by Alex Blair (RIP); 03-04-11 at 13:32.
|
|
#6
03-04-11, 20:42
|
|||
|
|||
|
Hi again,Richard,yes,it's the same one.
 Alex,thanks for the comments. I did not know they were brass.It took a while,but I know a couple guys near me who restored a carrier and they filled me in on what the fitting is for.Seemed very odd to me at first!  I think George's thread below this one deals with the brass cap? Indeed,lots of armor missing.At least most of that is flat and square,but still lots of work. Thanks for the comments,guys,and I will keep you all posted on my progress and who knows,maybe I can help someone else at some time.
|
|
#7
10-04-11, 09:00
|
|||
|
|||
|
Dave
The cap is steel. The large box is original kit. Good project.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
