It's now official I have a carrier platoon.

[kevin powles]

I thought that axle flat was there to accomodate a cold 1 pint glass of beer whilst working on the rear of the carrier, co's that's what i was using it for today and it works quite well!.

Lynn, I will check for numbers over the bank holiday weekend, the data plate holes for this one are on the front drivers wing.

Kevin.

[RichardT10829]

Originally Posted by kevin powles

I thought that axle flat was there to accomodate a cold 1 pint glass of beer whilst working on the rear of the carrier, co's that's what i was using it for today and it works quite well!.

Lynn, I will check for numbers over the bank holiday weekend, the data plate holes for this one are on the front drivers wing.

Kevin.

well yes that was its primary role but mainly for carriers destined for north africa holds carlsberg very well har har har !

[kevin powles]

Rich, I like dark beer most 'Adnams broardside' is the best.

Because this is an early carrier 1939 to 1941, I am going to paint it in the Caunter pattern for it to be different. I would be interested to have details you gathered together when reserching this Richard.

[Lynn Eades]

I think as part of the Brit specifications, thats where they all were.
The early Canadian ones were also on the right front guard (wing) until they changed the location. (I think the Canadians worked out that the front guards took a hammering, and often needed to be replaced,so that having the I.D. plate mounted on an item with a short life , was a mistake)

[kevin powles]

Lynn, You really do have alot of carrier parts there, that first data plate is that Canadian ?. You dont happen to know of any data plates going spare, are they made of brass ?.

Kevin.

[Lynn Eades]

Its more that I keep a lot of images. No I dont have any spare. I could do with one for my AOP, and for a Canadian Universal. I do have however an original 3 inch mortar carrier plate. I think both these plates are Ex Brit carriers.
The one I have for my LP Bren is also a copy.
Yes they are made of brass/ bronze/ gun metal/ brassy looking metal or what ever.
If you need a plate, and you are happy with a copy, I may be able to borrow one and have it copied. Let me know, and I'll do some research.

[kevin powles]

Thanks lynn, would like to get a Canadian data plate for this carrier if it looks the part. I guess all I need to find out is the W.D. number, this carrier also has the rements of some info on the drivers side armour, anyone know the best way of bringing this out to see it more clearly.

I would like a plate Lynn.

Thanks Kevin.

[RichardT10829]

Kevin. that caunter pattern is incorrect mind so dont use it.... you need to get in touch with Mike Starmer, there are two whole books just about the use of Caunter pattern. mine is still young enough (in war time) to have it but my grandads regiment were re forming in scotland when alamein etc was going on... then after 42 and alamein caunter was phased out and desert ZI pink was introduced. carriers look savage in caunter IMHO maybe some day after i have displayed mine in sicily colours i will number the hull correctly (and not 10829) and splash her up in caunter !

what colour are you doing the mortar ? that would be nice in desert base with black disruptive hint hint......just trying to get Shauns Mk1 the same so we can have a sicily campaign battle group

[Ron Pier]

Richard, if you want the others to follow suit regarding the Sicilian campaign? Just put some cotton wool in your cheeks and make them an offer they can't refuse. Ron

[Lynn Eades]

If you carrier turns out to be a Canadian one built for Canada, then Bob Carrerie posted this picture previously. You may be able to put his arm up his back, a little, and have him copy it. A bit of "plasticine" fills in the numbers to make a blank plate.

[kevin powles]

Hi, The cam drivers cover is held by two countersunk bolts which use the same holes as the bottom cam plate cover. There is a retaining plate (pretty rusted out) which bolts to the front with 1/4 bolts which I have removed but are tacked welded to the cover, this retaining plate must clamp the canvas in place.

kevin

[kevin powles]

Hi, This was painted on the side of the early canandian carrier, have asked a few people, seems C.S.R. could stand for Canadian Scottish Regiment.

Seems it could say this, there may be more letters before the 'B' and the CT number could be wrong.

B/M.G./C.S.R.
CT
434405

can anyone help?.

Kevin.

[RichardT10829]

just looking in vol.1 cant seem to locate that one in any batches however that does not mean the number is wrong......just isnt in the lists in Vol.1......have you been in touch with Nigel ?

[kevin powles]

Shaun, Yes thats the number we thought was there, but after looking at the photo's in photoshop and playing around with the pics, changing the tint, colour, sharpness etc, it could be this but with the 4 on the end.

too many didgits for an early CT number, maybe not a CT number?.

Kevin.

[Lynn Eades]

What about the possibility that the number has been overlaid by the same number, and can see some digits of both. Maybe its CTL 134405. There is a block of numbers not listed in Nigel's vol.I on page 293 there are 3 lots of numbers together that say "see notes" this lot of numbers slot in there.
None of this applies if this number is too high for the guard mounted data plate, which I suspect is only a four digit "T"number.

[kevin powles]

Hi, Received the new carrier project today, wife is unaware as I have it at a secret location, strip the hull and grit blast after Christmas.......cant wait to get stuck in. Video link of off loading below.


http://youtu.be/Vh_ixOhgmPg

kevin.

[Ben]

Nice looking carrier, you have the illness bad......four universals!!!

Happy Christmas

Ben

[Alex Blair (RIP)]

Originally Posted by kevin powles

Hi, Received the new carrier project today, wife is unaware as I have it at a secret location, strip the hull and grit blast after Christmas.......cant wait to get stuck in. Video link of off loading below.


http://youtu.be/Vh_ixOhgmPg

kevin.

Kevin..
Attach a big chunk of chain to it and give it to her for Christmas..I'm sure every woman would be pleased with a new necklace..
Merry Christmas.