MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 31-05-11, 01:32
Joel Culliford Joel Culliford is offline
Registered User
 
Join Date: Apr 2011
Location: Niagara Region
Posts: 77
Default

The CMP was in a bad mood today. The day at Port High started with the starter motor being placed back on to see if the flywheel would work. We crossed our fingers and hoped. We were repaid in kind, it cranked over. Since that worked, lets try the spark plugs....fiddle with the order until we got it right and we have spark!!! Now lets pour some gas in the carb and see if we get a bang.......nothing....again...nothing. Ok, let's try quick start.....we got a bang. But not with the gas.....the spark plugs are bone dry. So tomorrow we try to spray a little gas into the spark plug holes, and hope. If not then we start the process of compression tests and all that other stuff.

Instead of calling it a day the students replaced the clutch plate and put the transmission back on.
Reply With Quote
  #2  
Old 01-06-11, 15:53
Joel Culliford Joel Culliford is offline
Registered User
 
Join Date: Apr 2011
Location: Niagara Region
Posts: 77
Default

Hey Bob

Is that ring gear still available. We tried to repair the old ring gear and it just broke after the engine started. NAPA does not have any and will not have any for a minimum 2 -3 weeks. Even then they might not. Please let me know what it would cost....we only have about 2 1/2 weeks of school left and the students want to get the truck working and the body back on. I don't know if the Post Office is an option because of the chance of strike. Maybe Fedex or UPS.
Reply With Quote
  #3  
Old 02-06-11, 22:00
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,259
Default Flywheel....

Will check in the barn tonite....... pretty sure I have a couple....

Best bet is to ship by Grey hound between two sheets of plywood..... you cover shipping the flywheel is free. Will weight it tonite and get a Grey hound quote tomorrow.

The flywheel will not doubt need resurfacing of the clutch contact area by a local machine shop.... just checked Ottawa transmission.....takes about 6 hours and cost is $75.00

If everything checks out will ship Monday a.m.

Hang in there.

Bob C.
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada

Last edited by Bob Carriere; 03-06-11 at 02:38.
Reply With Quote
  #4  
Old 03-06-11, 02:40
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,259
Default Got it....

Crated and ready to go..will ship tomorrow...sucker weighs 40 pounds including the plywood and 2x4 sandwich.

Hang in there.

Bob
....from the Hammond gang.
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote
  #5  
Old 03-06-11, 21:03
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,259
Default It's gone.....

Crate has been shipped by bus before noon today..... should be in Niagara Falls after 9 tonite...... available for pick up at bus terminal Satruday morning when they open....... they have your home tel. number.

Shipped .....NOT....COD..... cheaper that way..... you owe me $45.90

Sure hope it fits.

Bob C

PS.... when the little girl at the counter tried to lift it over to the scale.... I warned her that it was heavy.... 39 pounds according to by home scale... she looked at it...... said OK 39 pounds...... one of the "goons" snatched it and put it on a cart......
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada

Last edited by Bob Carriere; 03-06-11 at 23:38.
Reply With Quote
  #6  
Old 03-06-11, 23:03
Joel Culliford Joel Culliford is offline
Registered User
 
Join Date: Apr 2011
Location: Niagara Region
Posts: 77
Default

Awesome, you are the best Bob.

Though I am confused, was it shipped COD and I also owe $46, or was it not shipped COD and I owe $46 dollars?

I might be able to pick it up tonight, hopefully, I have to be in Welland early tomorrow for reenacting display

Joel
Reply With Quote
  #7  
Old 03-06-11, 23:40
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,259
Default Sorry for the Kornfusion....

You only get to pay once...... $45.90 to me.....

Keep me posted of the results.....and you are welcome.

Bob
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote
  #8  
Old 24-06-11, 06:53
r.morrison r.morrison is offline
Registered User
 
Join Date: Nov 2007
Location: vancouver b.c.
Posts: 868
Thumbs up Godsend....

Hi Joel: Sorry for not getting back to you sooner...been out of town.

Now listen: I have someone here who is intersted in your school's project and is willing to help out with parts and info. I don't want to make this public knowledge or go through a lotta fru fra.

Send me a blurb about the vehicle, the school and the parts you need to my e-mail address and I will forward it on and help out getting things to you. Make sure you put in photos as well of the truck.

I don't have time to go back on the forum to put a package together. I'll leave that up to you. Don't pass this up!!!!


Once again...Welland bailing out Port Colborne's ass!!!

Former Welland boy....Robert Morrison

Welland Ontario....former home of a Titanic survivor and a recipient of the Victoria Cross from WW1

Last edited by Hanno Spoelstra; 24-06-11 at 10:02. Reason: spam control
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 15:13.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016