|
|
|
|
#1
05-09-11, 15:58
|
||||
|
||||
Craig:
Good news...I have 3 of the 4723s.  Bad news:... They are 3', 4', 6'.  If you can "glue" a 4' and a 6' together, they're yours for postage. Tried eBay? The cable trough on my veh has bolts that are painted over, but they look like yer standard bolt.
__________________
PRONTO SENDS 
|
|
#2
05-09-11, 16:26
|
|||
|
|||
|
I have only seen regular bolts on the floor cover, but copper bolts would make sense, since that location is prone to rusting. If you have the rest of the radio installation instructions, what is the spec number for the bolts? If it is a mil spec MS90765, 6, 7 or 8 (along with a dash and a couple more numbers, which will represent the size and length) these are just regular gr5 or 8 bolts.
|
|
#4
18-09-11, 02:30
|
||||
|
||||
|
Maybe a foot shorter
I just put in a 10ft power cable cx-4721 and found out it was more than adequate at 10ft so a 9ft cx-4723 may do. I will be ordering on from Fair Radio Sales and the let you know if it fits. I also found out that in the drawings it calls for a 80in (6.6ft) Power cable 5995-00-823-2827 CX-4720 that must be a discrepancy with that drawing.
__________________
Craig Harris 1953 M100 CDN 53-71203 1968 M38A1 CDN2 67-08470 1970 M38A1 CDN3 70-08790 Cold Lake AB 
|
|
#6
28-05-20, 07:08
|
||||
|
||||
|
No I just had a few pictures that where shared.
__________________
Craig Harris 1953 M100 CDN 53-71203 1968 M38A1 CDN2 67-08470 1970 M38A1 CDN3 70-08790 Cold Lake AB
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
