Ford Blitz Restoration/Rebuild

[Bob Moseley (RIP)]

Tony - there is no such thing as a major or minor rebuild of these things. Whatever has to be done, the booster has to be dissembled and that is quite tricky as it contains a large and powerful spring. Then the thing has to be cleaned and a replacement bucket and seals have to be fitted. Don't bother with the old bucket that could be at least 65-70 years old, these are life saving brake componants you are talking about. When I obtain the other contingencies I talked about I'll see if there is a spare one that I could get rebuilt.

With the master and slave cylinders any good brake place can clean, re-hone or re-line them along with putting all new componants in, i.e. pistons, seals and boots. You don't need to buy from overseas. Doing it all locally also gives you a comeback if anything untoward happens. I would also be wary of using your old brake linings, get them professionally replaced. No matter what vehicle I restore I always get the whole brake system professionally done. Brake lines are easy if you have templates or else if you have them, just a good flush is all that is needed.


Bob

[Private_collector]

Thankyou for you opinion about where and what I should be doing with my restoration. I am somewhat familiar with the disassembly of brake vacuum booster. I pulled apart an unservicable one, for sole puropse of examining the structure, a number of weeks ago. Additionally, I have consulted others who have already been through the process, to gain their knowledge & hindsight BEFORE I decide which path to take. If you read back through postings in this thread you will see I have purchased the repair and maintenance manual and this has been studied closely. As I have said in last 48hrs, there is a company in Brisbane who manufacture the parts you are so concerned about failing, so you need not worry yourself needlessly.

Regarding reconditioning VS new parts (where available). The 'comeback' you speak about is a situation I wish to avoid entirely with NEW replacements where indicated. Why place your safety in hands of someone elses ability to repair a 70 year old part when new is available? Especially when $$$ difference is negligable.

I will put countless hours into restoring minor parts with intention to retain as much originality as possible, but where safety is concerned i'll take new anytime where possible. You say you "always get the whole brake system professionally done" then you state "Brake lines are easy if you have templates or else if you have them, just a good flush is all that is needed" That is a contradiction of philosophies. There are things you can do yourself & there are things that only professionals SHOULD do. If you think for a moment or read back through thread, you may see that I don't half arse ANYTHING, especially concerning safety. Because I speak of rebuilding or repair, it doesn't mean I will be the one doing it. Give me some credit for common sense.

[Lynn Eades]

I'd like to say you are doing a great job! I dont spend much time looking at the softskin stuff, but I am enjoying your informative posts, good photos, and seeing your quality work coming together. Keep up the great work!

[Private_collector]

Lynn,

Thanks very much for your kind comments.

It really does help spur me on, seeing my efforts are looked on favorably.

I'm heading out right now to take rear axle/diff housing to sandblaster. Will be waiting while they do it then pick up some bearing cups from town, and return home to etch/prime the axle.
PA240431.jpg PA240427.jpg
Shouldn't get any grit inside. I wrapped sensitive areas in 10 layers of gaffer tape (with rags beneath), and the larger openings are covered with plates of MDF I made yesterday morning.

Lets see if it does the job.

[colin jones]

Hmm! Those comments got swept under the rug. Was that a moderator erasor or personal.

[Howard]

Originally Posted by colin jones

Hmm! Those comments got swept under the rug. Was that a moderator erasor or personal.

Yes, Colin, Cliff is a moderator and has acted appropriately by editing & deleting the posts.
H

[Private_collector]

I had asked for umpires decision (moderator).

We both agreed that removal of inflammatory comments was warranted, from both parties posting, and moderator acted in best possible way available.

The matter isn't really worth dwelling on and I hope it doesn't cause formation of bad feelings between any of the brotherhood!