The Rebuild

[Bob Moseley (RIP)]

Hi Robert - yes I am happy with the decal. I do have the correct ball handle toggle switches if you are interested.

Salesman Bob

[hrpearce]

Big changes this afternoon the spray rig is off and tray sitting on chassis. Andy the holes line up with the sides of the chassis. I now have to make a trailer for the spray rig as it is spraying season NOW I put out one last tank load last week. Rego inspection day is 6/11 so I only have a fiew days to bolt the tray down and fit mudflaps.
Now for the question what gap do I leave for the tool box/ spare carrier?
Bob I'll pass for now see you in Mach and you can try out your salesman skills.

[Bob Moseley (RIP)]

Hi Robert - I see you also need/might need a tailgate for your CI body. I have a contact who has made one and as stated in another thread we could always coerce Colin to make them. At this stage two are required, yours and our spare.

Bob

[hrpearce]

Bob I have a tailgate but it needs work and new latches so it will be hidden in a corner for a while yet.

[hrpearce]

I don't have to drive carefully now the body is bolted down. Thanks for the rough measurements Keith I started with your sugestion and riggled the body around until the bolts fitted past any obsticles and ended up with a gap that is plus 40mm either side of the tool box.
The last picture shows my fathers day present it's very handy for cutting timber in tight spaces.

[Andy Cusworth]

looking good Robert !

[hrpearce]

Thanks Andy.
Speedy has been reatached for rego day, I just need to give the Blitz a greese and wash now.
Keith your Blitz is still being used for above ground storage.