|
|
|
|
#1
30-12-11, 22:51
|
|||
|
|||
Puddle Jumper Stencils
Shaun, Thanks for the posting of your pics. Can you give us a description of the markings you have written down as to What was stenciled, and Where was the stencil was located. This is all good info for the detailed restorer.
Thanks, Harris 
|
|
#2
31-12-11, 00:07
|
|||
|
|||
|
OK , These are off my Mk 2 No 2* they are all 1/2 inch stencil .
The first one is on the outside of the rear armour between the bren tripod clamps. BREN TRIPOD WATER PROOF COVER The second is just above the center weapons bracket on the side armour (inside of course) BREN M.G OR SERVICE RIFLE OR THOMPSON S.M.G. These the only markings i could make out. But dont forget the re was also "SLING HERE" near the fron lifting eyes - not sure if it was stenciled near the lifting eyes in the rear .
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration )
|
|
#3
31-12-11, 00:08
|
|||
|
|||
|
drat they did not come out as i layed them out. the 2 lines are centered to each other - does that make sence ?
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration )
|
|
#5
08-01-12, 11:00
|
||||
|
||||
|
Just a reminder that I have, for anyone who missed it, a 1/2" stencil cutting machine and will gladly make stencils up for anyone who asks.
R
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
