|
|
|
|
#1
16-01-12, 10:42
|
|||
|
|||
Thats great Ron Thanks.
__________________
Shaun Hindle Morris C8 Ford GPW jeep 1945 Morris 1000 (ex mil) SAS LSV Harley Davidson MT 350 motor cycle Universal carrier MK 1*1943 Ronson (under restoration) Universal carrier MK 2* 1944 (Puddle Jumper HSK 345) Ferret MK 1/1 1956 Ferret MK 2/4 1958 CVR(T) Scorpion 432 MK2 Daimler MK1 armoured car 1943 (winner best wheeled armour W&P show 2011) Daimler Dingo MK2 1944 (awaiting restoration, aquired 11/12/2011) Fordson WOT 3 D 1940 (awaiting restoration ) 
|
|
#2
16-01-12, 12:51
|
||||
|
||||
|
Toolbin
Just a quick question, can anyone confirm or deny that a padded cover was fitted to the lid, on top of or around the sloped end.
It was a sort of kneeling pad I think. George.
|
|
#3
16-01-12, 15:58
|
||||
|
||||
|
i may be proven wrong but if you put your full weight on that tin it would probably flatten it, i have never seen any pads on that box.. the Mk2 seating height was set so you could lean into the weapon and the Mk1 had the collapsing seat so i would have thought padding the box would be pointless (luss you would be too close to the front armour by this point to fire the weapon correctly)
again i will no doubt be proven incorrect. Cheers Richie
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#4
16-01-12, 17:33
|
|||
|
|||
|
Reinforcing strap
The lid top has a reinforcing steel strap attached, similar to that which you would find on the rations box.
If you have a look at the Stencil thread by B. Harris you can see the lid hasp exists on his example as well. Last edited by Michael R.; 24-06-12 at 18:27.
|
|
#5
16-01-12, 18:54
|
|||
|
|||
|
George
Yes, the MkI box has a padded canvas pad along the front of the lid where it angles up onto the top. It is retained by a brass strip front and back, riveted to the lid.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#6
16-01-12, 20:46
|
||||
|
||||
|
The version of the box used in the T-16 is similar. No doubt based on what was already in production at the time. And it has the pad on it. I stand on the lid all the time and it holds OK. I wouldn't jump up and down on it but it is fairly strong.
Shots for comparison of the box with the pad installed in my carrier are at this link: http://www.mapleleafup.net/forums/sh...?t=9136&page=2
__________________
David Gordon - MVPA # 15292 '41 Willys MB British Airborne Jeep '42 Excelsior Welbike Mark I '43 BSA Folding Military Bicycle '44 Orme-Evans Airborne Trailer No. 1 Mk. II '44 Airborne 100-Gallon Water Bowser Trailer '44 Jowett Cars 4.2-Inch Towed Mortar '44 Daimler Scout Car Mark II '45 Studebaker M29C Weasel
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
