|
|
|
|
#2
17-03-12, 02:17
|
||||
|
||||
insulator
I've got the same type of insulator that Lynn has . It's part of the ground base setup. The brass cup sits on a spike, you push it into the ground .
Is yours the ground base Lynn ? MIKE
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad 
|
|
#3
17-03-12, 02:56
|
||||
|
||||
|
I think this is the truck mount. I got this pic off Bruce Parker some time ago. He likely still has it.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#4
17-03-12, 03:10
|
||||
|
||||
|
great
Quote:
Does Bruce own that mount , or is it just the pic he has ? Would like to get drawings .... Is Bruce still about ? Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#5
17-03-12, 03:11
|
|||
|
|||
|
Mike and David
Mike I have all of the Carrier mount, but only have the bare insulator of the smaller one (in my pictures) I suspect it was also used on carriers, and that the toothed base is interchangeable between both size insulators (5/8 and 7/8" aerials)
David the one in your picture is the one fitted to carriers. You will see there are two sets of holes on the carrier mount. The brass toothed mount fits the smaller set of holes, and is the same as yours. Maybe some one can explain the use of the larger hole set?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#6
17-03-12, 04:33
|
||||
|
||||
|
Mike, Bruce has the mount and he's still around somewhere.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#7
23-02-13, 00:30
|
||||
|
||||
|
Can any one tell me the development of the repro casting etc. I want one for an early Dingo with 11 set
I have some technical drawing of the base with dimensions. Would have posted it here but don't know how to post a picture. If you want the drawings please email me. peter admin@milmarket.org http://www.milmarket.org
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
