![]() |
|
#1
|
||||
|
||||
![]()
A VMVC member has one as well , Dominic Kaukas . It was imported a few years back by fellow member , along with a Steyr 1500 4X4 light truck. The Steyr is very original with its air cooled V8 fitted and the original cab still in situ. The Kubel , I believe, was a bundle of bits thrown in the deal .
http://www.vmvc.org.au/Articles/Wehrmacht.html I've heard , the Kubel in question has been researched , and it was a SS vehicle . I read of a Kubel replica being made down Geelong way by a MLU member, he might pop up and tell us more ![]() Mike PS I just dicovered the old VMVC website is still up and running ![]() http://www.vmvc.org.au/vmvc1au/vmvc/...u/index-2.html The Articles page is well worth a look http://www.vmvc.org.au/vmvc1au/vmvc/...ewsletter.html
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 22-04-12 at 03:04. |
#2
|
|||
|
|||
![]()
The replica kugel you refer to Mike was built by myself and Robin Mawson for use with the Geelong Military Re enactment Group quite a few years ago now. We had no vehicle to use to represent the German side so we built the replica on a donated 67 VW Beetle chassis. At that time there was no one making replica panels so I did all the body sheet metal from scratch while Robin took care of the mechanicals. A Kombi rear end was used for the rear reduction drive and to raise the rear end and adapters were made to raise the front end. 16 wheels we made using Ford Prefect rims on VW centers with a 10 mm spacer ring and all welded up. The three pieces were aligned by spinning them on the raised front hub. Not exactly precision engineering but they were within a couple of mm runout and never gave any trouble. The plans we used were nothing more than up scaling a 9th scale Tamiya model and plenty of photos. Michael McMahon did the canvas work. The vehicle looked the part and was great to drive. It did a lot of miles traveling around Australia for re enactment events. We eventually sold it to another collector in Sydney who changed it from Afika Korps livery to Wehmacht grey. He has since added a few more genuine parts which has improved its appearance.
|
#3
|
||||
|
||||
![]()
Here's a pic of a replica kubel (is this the one your talking about Jack?) at the Winchelsea history show in 2011.
__________________
Blitz books. |
#4
|
|||
|
|||
![]()
Tony,
Yes, some additional work was carried out by Army. It's a long story, with some less than satisfactory aspects that I don't think are appropriate to go into here, but the bulk of the work was done by Ken H under contract to AWM at the time of the purchase of the Kubal (and a number of other vehicles) from Ken's collection (early 1980s, I think). I think the Kubel is about the only item the AWM has left. It is, indeed, a long story. Mike C |
#5
|
|||
|
|||
![]()
That is the one Jason. It was originally in Afrika Korps colours. The bloke who owns it now has made it look much better with the original parts he put on it. Essentially though the body is as I finished it and mechanically it is unaltered although I think he might have found a few original engine components, air filter, fan or something to add to it.
|
![]() |
Thread Tools | |
Display Modes | |
|
|