![]() |
|
#1
|
|||
|
|||
![]()
Coming out of the woodwork now.
This Militant, now 1800 kms away from the Coles ones above , is an ex drilling-rig truck. Definatley a runner, it was used to recover a tractor crane (and part time water feature....) out of a dam only a few weeks back. Still has 6x6 capability. Air Cleaner is a modification, but the tyre carrier appears to be original. Bit of a worry, the rear split rim has been bolted back together wrongly, and the whole tyre/rim fitted backwards, by the previous owner. Looking forward to a drive on the next visit.
__________________
C60S Austin Champ x 2 Humber 1 Ton & Trailer Last edited by Richard Coutts-Smith; 10-05-12 at 05:26. |
#2
|
|||
|
|||
![]()
Nice big cab, but bugger all room in it.
Ampmeter may just not be original... Note that this is a different steering column to the Coles Conversion shown previously. Appreciate any suggestions as to why, I know the latter marks had different ratios, but I assume this would not affect the cloumn itself. Rich.
__________________
C60S Austin Champ x 2 Humber 1 Ton & Trailer |
#3
|
||||
|
||||
![]()
Hi Rich,
a brief reply as I will be off to work soon. Brings back memories! The "geared" steering on the Coles chassis .... this was in fact connected to a large electric motor attached to the steering column, when operating the crane in Free-on-Wheels mode, the crane operator could drive and steer the cranne using a joystick control in the crane cab, brake control as well. There would be a big electric motor connected to the transfer box as well, the drive motor. If you have seen a 6x6 with no output flange from the transfer box for front wheel drive, then it might be a box has been changed from a 6x4 version. Room in cab? The 11.3 AEC engine took precedence in there, gear lever hard against your left leg, real basic stuff, but they are definitely of character! regards, Richard
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
![]() |
Thread Tools | |
Display Modes | |
|
|