|
|
#4
24-09-12, 09:27
|
|||
|
|||
This is for the #2 power supply.
pin1 -12v heaters, -12v dynamotor & gnd pin2 i/c speech pin3 +12v heaters & relay pin4 +12v vibrator & dynamotor pin5 signal pin6 -12v vibrator If working only from the vibrator it is advisable not to power the i/c, A set & B set all at once as it loads the psu. Besides, there's nothing like the scream of a well lubed dynamotor. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode