![]() |
|
#1
|
|||
|
|||
![]()
I think they got more right than they got wrong
|
#2
|
|||
|
|||
![]()
Can't say I ever heard that the range was 450 yards for the sniper shot in the village in SPR. Looked a lot less than that considering the size of the image in the German's scope. The German would have been in the next village at 450 yards range! Still: who cares? GREAT movie, followed by two excellent series: Band of Brothers and Pacific. Bring on more quality movies/series like those, I say.
There is a credited 'through the scope' shot taken by a USMC sniper in Vietnam. Carlos Hathcock just managed to outwit an NVA sniper out hunting him. He reportedly recovered the rifle and scope, but it got swallowed up by the US intelligence system, so the story goes. Mike C |
#3
|
||||
|
||||
![]() Quote:
In the SPR movie, the sniper is a soldier called Jackson, Jackson does say that the range is 450 yds , listen closely and you will hear him . The 'expert' on that show said, the Rangers would not have been used on a mission such as portrayed in SPR . 'Hollywood fantasy' or something similar he said . Anyway , these recent productions are miles ahead of the crap made in the 1960's . Movies such as ' Battle of the Bulge' are a classic stuff up . Still, there is the odd modern stuff up 'Pearl Harbour' is one '
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
#4
|
|||
|
|||
![]()
Beware the tumbling bullet.
Continuing with the theme of bullet behaviour, one of the reasons given in the program for water providing protection from small arms fire is that the water caused the bullet to tumble thus dissipating energy more quickly. A tumbling bullet also makes for far more serious wounds if it strikes a human body so being immersed or partly submerged in water may very well work against you. The .303 British rifle cartridge went through many changes in its development including hollow point versions often referred to as dum dum bullets. These were later outlawed by the Geneva Convention. The bullet designers went back to the drawing board and ultimately came up with the Mark 7 projectile which incorporates a cunning feature that even most of the users were unaware of. The core of the 174 grain fully copper jacketed bullet was not entirely lead filled, the first 5/16" or so was in fact aluminium or composite material much lighter than lead. The effect of the plug of lighter material at the front of the bullet was to shift the centre of gravity slightly aft making the bullet less stable if it encountered resistance, ie it was demonstrably more prone to tumble when it struck something instead of continuing straight through leaving a neat round hole. The Mk 7 Ball cartridge as it is correctly titled was the standard rifle round used by British and Commonwealth forces before during and after WW2. It was produced in the billions and had a nasty little secret. David
__________________
Hell no! I'm not that old! |
#5
|
|||
|
|||
![]()
Interesting Dave, but according to BA Temple (1986) 'Identification Manual on the .303 British Service Cartridge No.1 Ball Ammunition' page 5:
'Contrary to popular belief that this compound core was intended to make the nose light so that on impact the base would try to overtake it and so cause the bullet to tumble, and thus make a more severe wound, it was actually designed to allow the weight of the bullet to be reduced without a corresponding reduction in length. Ballistically, the longer the bullet in relation to its diameter the better, but if the Mk.VII bullet had a solid core its weight would be about 196 grains, or not much less than the previous service bullet, so much of the benefit of the pointed shape would have been lost.' The only time I ever experienced/observed bullet tumble firing .303 was Mk8Z rounds through a 'semi smooth bore' P14 (Rifle, No.3 MK.1) - much tooooo much velocity for the poor old, worn smooth barrel. By the time they were 50 yards away, they were off course and going sideways through a paper target, leaving a perfect boat-tailed bullet shaped profile. I kept the Mk8Z for my No.4 and No.4T rifles after that! Mike C |
#6
|
|||
|
|||
![]()
What you state is perfectly correct Mike except for two salient points.
One is that for whatever reason the lighter material was placed at the front of the core it does move the CofG back and thus reduce stability. Surely if you wanted to lighten a given projectile by adding a less dense material to the core it would make more sense to place it at the other end and so INCREASE stability. Second. As far as I am aware. Nobody before or since has felt the need to incorporate a similar feature FOR PURELY BALLISTIC REASONS. Contrary to your experience Mike, I have on several occasions had Mark 7 bullets strike sideways. Some have even done so after free flight which still puzzles me. The most impressive example was when operating a snap target at Williamstown Rifle Range. The fellow shooting at my target was aiming low and the bullets were striking the parapet first. Four consecutive shots went through the 3x1 inch stick to which the target was attached. All four were clearly travelling sideways and by then the stick was so wonky that I couldn't put it up for the next shot. Being on the receiving end sure gives you a different perspective. Cheers, Dave
__________________
Hell no! I'm not that old! |
#7
|
|||
|
|||
![]()
Well, Dave, from what you contend in your first point, any round structured with a light weight nose would be less stable and prone to tumble. Yet Observation rounds (like the Brit L11A1 and L11A2, among others) were designed for great accuracy at long range ie very stable in flight, in order to maintain a pseudo-ballistic match to larger calibre projectiles for sighting purposes. These were typically structured with a light weight flash mixture contained within the nose, and a lead slug behind. Same goes for several US 'flash-spotting' rounds and training rounds, and numerous other specialist rounds with various mixtures housed within the tip of the bullet.
Sure, I don't know of another Ball round structured the way the Mk.VII .303 either, but there are plenty of examples of very stable specialist rounds structured that way. Mike C |
#8
|
||||
|
||||
![]() Quote:
The tumbling of a bullet on impact is not induced by the CoG being towards the rear of the bullet mass, it is induced by a Gyroscopic Effect, where a rotating mass which suddenly decellerates will twist on it's axis. This was also famously apparent in the US M16 rifle, which was described as an "insidious characteristic" of 5.56mm ammunition when introduced. After an outcry over it's "inhumanity" due to the severe wounds it caused (it's a war, go figure!), it was modified by reducing the rate of twist of the rifling in the barrel to reduce the rpm of the bullet in flight, which in turn reduced the tendency to tumble on decelleration of impact. It is certainly not a unique characteristic on the .303 Mk7 Ball Cartridge. |
![]() |
Thread Tools | |
Display Modes | |
|
|