|
|
|
|
#1
21-03-13, 01:40
|
|||
|
|||
Hi Phil.
Did you check the OD on your lines? And any pics of line from filter to pump? Svenn 
|
|
#2
25-03-13, 23:50
|
|||
|
|||
|
Check fuel line size
Hi Svenn
I checked today the fuel line size on my HUP 5/16 steel tubing tanks to carb. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#3
24-06-15, 19:00
|
||||
|
||||
|
I'm just working on the fuel lines for my CMP. I am wondering if anyone has a source for the two grommets that are mounted in the frame where the lines cross through?
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#4
25-06-15, 00:03
|
|||
|
|||
|
Check with Brian A.
.... he had some nice felt gromlets at one time.....
Or take 1/4 in rubber hose.... slice lenght wise cut to proper lenght to fit the circumference of the hole.....squish it in place....... I also covered my fuel lines with a sliced section of 5/16 rubber hose...fastened with SS small hose clamps in any high rish area....... Cheers
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
