MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Armour Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 27-07-13, 15:53
Ed Storey Ed Storey is offline
Registered User
 
Join Date: Feb 2003
Location: Ottawa
Posts: 1,718
Default Penguins

I was under the impression that Canadian Armoured Snowmobile Mk Is were converted into Penguin Mk Is. If this was the case, not all of the Armoured Snowmobiles were converted at the same time as here is an image from Exercise Musk Ox showing both vehicles in use.



I have both the Penguin Mk II and Mk III recorded as having been manufactured by Canadian Arsenals Limited. I do not have production figures but again my records indicate that both vehicles had an ambulance version.

Here is an image of a Penguin Mk II.

Reply With Quote
  #2  
Old 27-07-13, 19:00
David Herbert David Herbert is offline
Registered User
 
Join Date: Mar 2010
Location: Ayrshire, Scotland - previously Suffolk
Posts: 563
Default

Nice picture of a Penguin Mk II.

Interesting that the tires are treaded - I thought that they were smooth and were made specially for this application. but it would seem that 4.50 x 16 was a size used on ordinary vehicles so might still be available if you are not too fussy about the tread. Was this size not used on the front of small 1950s farm tractors? Ply rating might be an issue but there are a lot of wheels holding up a not very heavy vehicle and if they were foam filled I can't see a problem.

It really is worth reading through Hanno's link to the debate about these machines that happened twelve years ago. I am getting into these Penguins now: more impressive, rare and robust than a Weasel, no real weaknesses, big enough to take your friends for a ride, fun to drive, transportable to shows, could even be handy if it snows. There must be more hidden away.

David
Reply With Quote
  #3  
Old 27-07-13, 19:21
David Herbert David Herbert is offline
Registered User
 
Join Date: Mar 2010
Location: Ayrshire, Scotland - previously Suffolk
Posts: 563
Default

Looking more closely at the photos it seems that the ambulance Penguin II had its outer front windows hinged so that they open sideways toward the centre of the vehicle but on the non ambulance version all three front windows just open upwards. A handy recognition point. I wonder why they didn't put stretcher hatches in the back, either side of the radiator grille, it looks like there was enough room but maybe the fuel tanks are in the rear corners or something like that.

David
Reply With Quote
  #4  
Old 27-07-13, 20:00
Robin Craig's Avatar
Robin Craig Robin Craig is offline
Registered User
 
Join Date: Jan 2006
Location: Near Kingston, ON, Canada
Posts: 2,163
Default

I hate racoons, in one spring we had one excavator two Land Rovers and a pontoon boat nailed. About $7,000 worth of damage in all. I hate them.

As Chris pointed out we at work often have sea cans coming, next is due to arrive 8th August.

I know of another one coming this year, that is the last that I know about currently.

I love the history Rob, love the fact that people like Ed have all the photos to tie it all together.

Was track tension soley based on air pressure over all the tyres?

R
Reply With Quote
  #5  
Old 28-07-13, 06:27
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,600
Default

Does anyone know the actual production numbers for the original armoured snowmobile, how many stayed in Canada, how many went elsewhere and was the Penguin solely a Canadian idea/conversion?

It would be interesting to see an armoured snowmobile sitting next to a Weasel. The one in Ed's photo looks rather low, lean and mean!

David
Reply With Quote
  #6  
Old 30-12-13, 17:08
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,600
Default Any Updates on parts or work, Rob?

Was down at the local dog park this morning so the little guy could have a squirt and spotted a pair of racoons heading across the river. Made me think of your Penguin Project, Rob, and I got curious about any new developments.


David
Reply With Quote
  #7  
Old 30-12-13, 18:53
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,595
Default

It is -30 outside right now, so no new developments. It will sit for a year or three while I gather information and leads.

As an aside, I have bought a bunch of sheds from the base here, including a 40X100 foot shed with 21 foot ceiling. I only work on days that are warmer than -15, and that has not been a while lot of days, let me assure you. Once re-assembled here either this summer or next, it should provide indoor storage for all my toys.

Last edited by rob love; 30-12-13 at 20:21.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nigel Watson on Penguin poo Snowtractor The Sergeants' Mess 1 25-12-03 05:31
Penguin MarkIII dalent The Armour Forum 1 13-12-03 09:05


All times are GMT +2. The time now is 17:53.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016