Rear axle seals

[Maurice Donckers]

Lynn my C15 no11 cab has GM brakes (always poor )they are all round the same as GMC cckw banj front shoes . Brake cilinders are also 1 1/4 front like banjo , but the rear ones are outward the same as 1 1/4 but are internally 1 3/8.
My CGT and C15A have ford products .

[Maurice Donckers]

Michael , thanks , that must be it then , wonder how manny are mounted the other way round , that also makes clear why there are 2 treaded holes in them to pull them out , if the lip is facing inward , then resistancewhen pulling them out would be less.

[Shane]

Hello all.
A product that you can pour into the diff that will lube and stop the seal from leaking Ive only come across this one www.liquidintelligence.com.au has any used these products before? Cheers Lads

[Maurice Donckers]

Shane to my knowledge these products only work on modern rubber seals , not on our old leather seals . it makes the seal to swell a little bit , but in my opinion if a seal is worn , the only way to repair is to replace the seal.