Wanted: Carrier Radiator Cap Bellows Assembly

[Lynn Eades]

Is anybody out there possibly sitting on a pile of these, that might like to sell 1 or 2 of them?
If you are that person, can you please contact me.
Thankyou in advance.
Lynn.
p.s., I wouldn't turn down whole cap assemblies either.

[Lynn Eades]

just bumping it, and to let Kevin know I've had no response, at all.

[Euan McDonald]

I have a number of cap but what is correct?

[Lynn Eades]

Hi Euan, The riveted carriers have a special screw in cap that can be dis assembled and adjusted. It has a bellows arrangement.
Your set up with a commercial $6.00 cap is the best system. There is a lot of fafing around just to check the water level in a riveted carrier.
Kevin previously listed that he wants an elbow from the top, I want the diaphragm.
I will get a picture later up so you can see. Someone will have one, and not even know what it is.

[Lynn Eades]

Cap assy picture.
I am looking for "D"
Kevin is looking for "A" (I think)

[Lynn Eades]

Bumping my add again, just in case some body has had a truck load of them turn up on their front lawn (or in Australia, on the dirt between the fence and the street)
We live in hope don't we.
If this doesn't work, I'm then looking for an Australian carrier radiator pressure valve.

[Doug Lavoie]

Lynn,
I wish I could give you a rad cap. I gave my spare carrier rad and cap to a fellow MLU`er (Jim DeBock) shortly after I started in this hobby. Sorry!
I will keep a look out for you.
Doug

[RichardT10829]

I have the bypas elbow but that is all.... Will see if I can dig it out.... My rad is clearly a later one with the normal type cap (which is missing)

[Lynn Eades]

Thanks guys