Toggle switch

[Neil Ashley]

My Carrier has both a light on the rear of the vehicle featuring the red and white switch, and one on the Towing attachment which is not connected up and does not feature a switch.

Does this suggest that my Carrier although a Mk11* was originally built without a towing attachment.

[Ron Pier]

Neil. So you have two rear lamps? I don't know enough to comment on your carrier. I can send you the pictures that Shaun sent me for the set up on a carrier fitted with Stacey towing attachment. Ron

[Neil Ashley]

Only the one on the rear of the vehicle is wired in and the one on the towing attachment still has the waxed paper on the wiring suggesting it has never been used.

[Ron Pier]

Neil it definitely sound to me like your towing attachment has been added at a later date. Your choice now which way to go. At least we now have pictures of how it's fitted up for the Stacey equipment. Ron

[Petr Brezina]

Does any of you have a rearlight assembly as on the attached drawing? I never saw it but this should be valid for Universal Mk.II and Mk.III and I think that I have exactly this on my carrier (well remains of this).
As seen on the attached picture (will send better one evening), there are two diagonal holes on the backplate which, I suppose, are for mounting of the toggle switch box and both lights. On my carrier also back section of the wiring pipes survived so as the clamps pos. 74 and 61.
So I think that switch box should be mounted on the inner side of the backplate with rear lamp (left on the drawing) facing backwards just out of the the backplate and axle flooding lamp (right on the drawing) facing under the vehicle.
Im I right?
And one more stupid question - what is the exact purpose of the axle flooding lamp? Thank you!

[Petr Brezina]

Originally Posted by Petr Brezina

And one more stupid question - what is the exact purpose of the axle flooding lamp? Thank you!

This part solved

[Petr Brezina]

Better picture