![]() |
|
#1
|
|||
|
|||
![]()
yes, realy thanks for that , it explains everyting .
The wooden blocks in a regular cab are in line with the vehicle , and I noticed on the hup they are under an angle . building year from this hup must be 43 . no data plate. 2 side doors , rectangular roof hatch , round instruments , hard rubber steering wheel. again thanks for info . |
#2
|
|||
|
|||
![]()
Thanks , brackets aree fitted.
Another question , were are the sidescreens stowed when not in use? |
#3
|
|||
|
|||
![]()
Hi Maurice,
The sidescreens are stowed in the wire mesh bins shown in the picture in post #6 from Phil Waterman. Cheers, Brian |
#4
|
|||
|
|||
![]()
Hi Maurice
Do you need photos of the rack and the mounting points? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#5
|
|||
|
|||
![]()
Phil thanks , but one of the side bins is still there , just the bottom piece is missing , but from the pictures in this post I can figure them out .and will copy one for the other side,
By the way the floor is made from checker plate , not the type as in the pictures in this post . Next bit will be the 1 gallon can holders for under the rear of the body , when these are done the body can go on the finished chassis . Are there drawings available from these holders?I have seen copies in the past in France. Will take some pictures next week . The vehicle base collor is Brown , scratched paint away on the front , and there seem to be remains of markings there , will try to save them . |
#6
|
|||
|
|||
![]()
Hi Maurice
W Rear Holder Box.jpg Are these the critters? I replaced the original holder boxes on mine because they had been flattened and straightened out to many times. So I have the originals sitting on the shelf, I think I did CAD drawings of them I'll look. Failing that I'll just measure and photograph mine for you to work from. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#7
|
||||
|
||||
![]()
I used these diagrams to make up 10 sets of these beasts.
I welded up a set of them for my 45 HUP, so I still have eight spares (unwelded) here at the Hammond Barn, just south of the glaciers pushing from the north and just east of the frozen Great Lakes, in Canada.
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
M152 Interior Layout | Jason Ginn | Post-war Military Vehicles | 9 | 10-11-10 17:29 |
Carrier Interior | kevin powles | The Carrier Forum | 1 | 20-08-09 13:17 |
WD Interior Lamps | Richard Farrant | For Sale Or Wanted | 23 | 20-10-06 12:45 |
UC Grenade Box Interior | rob love | The Carrier Forum | 7 | 13-04-06 05:09 |
CMP Cab 12 interior | Steve Guthrie | The Softskin Forum | 10 | 03-04-05 17:53 |