|
|
#2
07-03-14, 18:44
|
||||
|
||||
No it's a nightmare.... Pull the rollers off the inside of the hull they come out with one bolt, then remove the castings from the hull wall so they don't get damaged.... Slide them along the tube out of harms way so you have a bit room to move, remove the cam plate, then put a brass dolly in the end of the tube and give it a good whack...
Did mine not so long ago http://www.mapleleafup.net/forums/sh...=12965&page=12
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A slow way to remove paint | Keith Webb | The Restoration Forum | 2 | 24-09-12 08:14 |
| You tube | Ledsel | The Carrier Forum | 3 | 03-04-08 03:01 |
| A Rattling Good Read -- Remove if old news | Bob Potter | WW2 Military History & Equipment | 2 | 11-11-07 01:49 |
| UC Cross Tube Gaitors | Stewart Loy | The Carrier Forum | 25 | 17-08-06 16:46 |
Threaded Mode