Ford Blitz Restoration/Rebuild

[Private_collector]

Cheers to Lynn & Terry!

From info supplied, and photo/s to come, I think we are in business. I have never actually seen that particular part......in real life. If I had the forethought to do so, I could have asked to peek under the skirt of any number of Ford CMPs at shows, but I never gave a moments consideration to the topic. It's hard to think straight when salivating at well restored MVs anyway.

Must be about time I filled the master cylinder and bled the brake system too. Buying brake fluid is on my to do list for this Saturday. Also spoke with a lubricants supplier a number of weeks ago, about a higher viscosity substitute for diffs & gear cases that he recommended. He feels it may be a better proposition for older applications where parts have some wear. Not cheap stuff, but could be a good option, particularly with added benefit of quietening any whine. So they say.

[T Creighton]

Good Morning Tony,
I found my camera was set at max resolution and the files were too big to upload.I think I have it sorted now.
Let me know if you want any measurements.
Cheers,
Terry

[Private_collector]

Hmmmmmmm, very interesting!

I can make something that looks like that, I think.

Thanks Terry.

[Private_collector]

Cleaned up the radiator today.
Radiator bare 1.jpg Radiator bare 2.jpg
I bought this one from my Late friend, Paddy. He only asked for the scrap value, $60.00. It had been recored a long time ago, and not really used since that was done. Still has a light oil inside. Well, it DID have a light oil inside. I flushed it out when checking for any gross leaks.
Radiator bare 3.jpg
The lower water necks are a nice piece of work. Whats with the screw heads on each corner? Surely they are not functional!
Radiator painted 1.jpg
After a lick of paint. The wind came up jast after applying the last coat, so I may knock the top off, and give one more spray, next weekend. There is a small plate attached to top tank, which says Maryborough Radiator Services, or something like that. If you look at the very left of the radiator hanging upside down, you can make out the plate. An aluminium sticker with business name was on the very top panel too. I removed it prior to scrubbing, and will reattach it later. The recore must have been done a very long time ago. The phone number had 4 digits in total. There would now be 8 digits. The business has either ceased trading or changed names & address.
Radiator drain cocks.jpg
Even the drain taps are OK to re-use. I cleaned them prior to this shot.

I will buy a new radiator cap and hoses, when I get a chance.

[Ryan]

The freshen of that radiator can only be described as sexy.

[Private_collector]

I am keen to hear of any experiences members may have with using DOT5 brake fluid. That is the silicone fluid. It is not compatable with systems which have previously run on Dots 2,3 4, or 5.1 unless the entire brake system is flushed entirely free of the others. It doen't mix well with others. Bit like me at school, all those years ago.

I have put a lot of time into researching the pros & cons of all options, but would like to hear first hand reports of satisfaction.......or disappointment for that matter. I intend to replace the fluid regularly, and was thinking 2nd yearly would suffice. Because my entire hydraulic system is brand new, and has never had any fluid through, now is the time to commit to one specific type. I am particularly pleased that DOT 5 does NOT damage paint. While that is not sole motivation, it sure is a desirable attribute. I know at some point there will be leak/s. Maybe sooner, maybe later. I am about to discover exactly how well the flares on the steel lines actually are. A bit nervous about it too.

Here is a VERY informative dissertation on DOT 5: http://www.buckeyetriumphs.org/techn...luid/Fluid.htm The author seems very pleased with his choice, and has even done a range of 'tests' prior to making the selection. A bit overboard really! And I thought I was bad, jeeeeezus!!!



Nearly forgot to mention that I have ordered a custom made stamp with a small ford logo, to use on items like fan belts, radiator hoses etc, which are hopefully good copies but not original Ford product. There wont be a part number, but the stamps are only a few dollars, so I thought I might have a little 'play' and see how it works out. I hope Ford Motor Co. spell my name right on the legal papers!

[Phil Waterman]

Hi Tony

First question- Have any of your cylinders been sleeved? If so silicone fluid may cause a leak problem. Don't know if this is still true but for years the company that I use would not warranty their sleeved cylinders if silicone fluid was used. Don't know if this is still true.

What I was told was that the silicone fluid would actually leak along the out side of the sleeve between the sleeve and cylinder body.

Cheers Phil