For Sale: Packrat thinning out some CMP stuff

[Lynn Eades]

Rob, Nicely put together. Doug you probably need to re read it.

[Bob Carriere]

Hi Rob

I ran into some problems fitting a gas tank on my cab 11...... I refinished two tanks RH/LH and after they were all done the LH (pass.) side would not fit.

It seems that some tanks have 6 inches between the forward end of the tank and the filler neck and some have 9 inches. The short 6 inch one wil not fit as the filler neck would not fit under the floor plate.

Can you measure yours and let me know. I am working on a C15a and both my tanks have the short filler neck have the 5 bolts float cover of the Chev. I also have a Ford tank that as only 6 inches.

I will be starting up a new thread on the gas tanks as soon as I get more info.
What would the short 6 inch tank fit is a mystery to me.

Thanks

Bob C

[Doug Lavoie]

Lynn,
All is in hand, but Thanks for keeping an eye on things for me. All I need to do is de solder the tops of my plain ones, and replace with Rob`s. They are the same extinguisher, just mine are not embossed.
Doug