Funnel Information

[Michael R.]

The petrol funnel for the MK-II* appears to have part number CTL 14163, and inventories to the C31UCW series only, as a single part.
The image is from Andy D of Crawley, a superbly equipped tools stowage bin.

If I understand the part numbers correctly, the other funnel is a CMP part number, C01Q 17199C?
That funnel is capable of fitting a spout, C01Q 17190B.

Is this other funnel similar to what Robin B is describing?
IIRC, Jordan B knows where this funnel is stowed on the MK-I* series.
.
.
.

[Ed Storey]

This is the example that I own.

[Jordan Baker]

Sorry, my memory is pretty bad and I don't remember where they are supposed to go.

[Ron Pier]

John (Blackpowder) I was also wrongly under the impression that the funnel was the one that looked like half a funnel. That obvious stowage is something that hadn't occurred to me either...... Don't forget I'm little over an hour away from you if you have a spare one. Ron

[Michael R.]

Stowage in the lockable off side box over the fuel tank vs under an non locable access door on the near side....

[Rob Beale]

here are pics of my two. Probably easier to interpret my description above.
They show the different spout location, and the ribs inside the top edge.
The other pic shows how a 2 gal can fits in the funnel

One is C^ marked, the other is likely a civvie one.

Rob