Restoration of Hull 731- Carrier, MG (Aust) Mortar Carrying

[Dale Jordan]

This post is good timing for me Darrin . As I'm at that stage now . Yes I can understand how hard it must be for you now . Not much room down there , as it's hard enough for me without the engine and air scoop in the hull . Great photos and info for other carrier owners on the MLU . Once my wiring loom turns up I'll follow your lead and run it through the conduit and install it early in the build .. keep the photos coming . P.S I have seen a photo somewhere showing a joint in the 3/4 inch conduit that goes under the RHS station just in front of it , which makes sense as it would be hard to get it all together in one peace underneath that station support I've tried that when I did a dry fit last week . Dale