LP2 VR 2225 Build

[Dale Jordan]

I had a little bit of spare time over the last couple of days to sandblast tidy up and paint khaki green no 3 on my flare box . I will paint the red white and green on the lid in the next couple of days . Thanks to Euan and Darrin for their photos

PS thanks for your comments David and Lance .. My carrier is at a good stage now as I'm not going backward to go forward , each time I add a part it for good . I have had lots of help from MLU members as I'm not very mechanical minded I hope my post help other Aussie carrier builders . Dale

[Dale Jordan]

Here is a photo of my track they are 90% in excellent condition , but I have 25 to 30 links that need up dating on one track tail . so I'm hoping some one can help me out on MLU . My track looks like it has not been used much as it still has the casting lugs on the centre sprocket hole . If some one can help me out PM me . Dale

[Dale Jordan]

Today I painted up the three colours on the flare box lid . From Darrins and Euan photos it looks like some where painted with the colour going around the corners of the lid , or flat on top . Dale

[Dale Jordan]

Can some-one help me out with what the retaining clip that hold the hand brake cable into position on the hand brake looks like , also the clamp that holds it at it's end to the bracket on the lower hull front . I can't find any info in the parts book . If any one has some spare for sale I'll buy . Dale

[Dale Jordan]

I found these today do they look correct for an LP2 carrier dash . They are NOS.. Dale

[Dale Jordan]

I'm still after a close up photo of the clamp that holds the bottom of the hand brake cable to the tag welded to the lower front plate maybe some one has this part on the bench the manual picture has no detail . Thanks Dale

[Big D]

Hi Dale

I can't get to my carrier at present but do these old photos help at all?