|
|
|
|
#1
03-08-15, 23:32
|
|||
|
|||
I seem to remember the "S" was some kind of proof/check mark (?). I know it has been discussed before, but can't remember which thread.
My C8 also has an "S" on the chassis, but I think my font is slightly different. Good progress Jacek! What a coincidence....I also put a first coat of primer on my cab frame, last weekend! Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle 
|
|
#2
04-08-15, 03:47
|
|||
|
|||
|
Previous thread on HUP....
.... back to the Caldswell days.... seen on his HUP frame........ I think?????
Cheers
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#4
23-08-15, 23:17
|
||||
|
||||
|
One of two oryginal tires , I think. Goodyear 1940 profuction . Any idea why it is so heavy ? I can lift other wheels myself but these two are too damn heavy for one man to lift.
|
|
#5
23-08-15, 23:25
|
||||
|
||||
|
The R.F. stands for "Run Flat", a tyre type with very thick side walls, up to 5 cm or so. If punctured by a bullet it would still be usable, holding up the vehicle not by the compressed air in the tyre chamber, but by the thick tyre side walls.
http://www.mapleleafup.nl/cmpvehicles/tyres_900-16.html H.
__________________
Regards, Hanno -------------------------- Last edited by Hanno Spoelstra; 03-10-15 at 21:51. Reason: Fixed link
|
|
#6
23-08-15, 23:27
|
|||
|
|||
|
Jacek,
Sounds like a run-flat tyre....they use far more rubber than an ordinary tyre. or....you could have a leak and the tyre filled with water in stead of air  Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle
|
|
#7
23-08-15, 23:55
|
||||
|
||||
|
Run flats also have a rim liner that's a couple of inches thick to keep the tire on the bead.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#8
20-09-15, 16:58
|
||||
|
||||
|
Disassembly was quite easy. Ready for reconditioning.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CMP 2K1 Van body | Dennis Gelean (RIP) | The Restoration Forum | 7 | 17-09-10 00:25 |
| GS body | Radek | The Softskin Forum | 7 | 14-08-10 15:11 |
| body id | mafiamike | The Restoration Forum | 2 | 25-02-10 01:03 |
| Chevrolet C60L with early GS body | Larry Hayward | The Softskin Forum | 24 | 22-07-09 12:51 |
| CGT with body 7A2 | Van Hove Herman | The Restoration Forum | 9 | 16-04-09 23:35 |
Hybrid Mode
