|
|
|
|
#1
05-01-16, 03:48
|
||||
|
||||
Great time-lapse Phil. Can you post a photo of your lifting crane? Is it a custom design that you came up with...? Looks interesting.
__________________
1953 M37 CDN 1953 M38A1 CDN 1967 M38A1 CDN2 
|
|
#2
05-01-16, 14:22
|
|||
|
|||
|
Custom Engine Lifting Bar
Quote:
Yes the one in the video is one I made up, the cheepy ones that most auto parts carry are not worth much. Here is a quick link to it on my web page, will post some better photos and info directly to MLU later. http://canadianmilitarypattern.com/Tools.html More on pulling the engine including how overcome the balance point issue (at the bottom of the page) http://canadianmilitarypattern.com/H...AUL%202011.htm The unit I built also works with big flathead V8 Lincoln flathead weighs about 1000 lbs (look about half way down the page. http://canadianmilitarypattern.com/R...%20Lincoln.htm Will take some more photos and details of the unit I built. It is also very useful in picking other CMP parts like axles. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
