WS19 - Antenna Base fittings

[Chris Suslowicz]

Originally Posted by Tim Bell

Parts I therefore need to find to complete what I need for the installation are:

Working from the Aerial Base down...

1 x Tab Washer - PC 47448C
1 x Variometer Adapter Washer - SD III R-140
1 x Variometer Adapter Plate - WA 623 - SD III R-113
1 x Plates, Packing No 1 - PC 76552C - ZA 2948

If anyone has any of the above parts they are happy to part with, please let me know.

Cheers

Tim

I have the last three items (NOS and still in their envelopes), and can possibly scavenge a tab washer (though that will mean I then have to find one to complete the feeder again).

Chris.
(Back from Beltring and just about recovering from it - I need some new knees!)

[Tim Bell]

Originally Posted by Chris Suslowicz

I have the last three items (NOS and still in their envelopes), and can possibly scavenge a tab washer (though that will mean I then have to find one to complete the feeder again).

Chris.
(Back from Beltring and just about recovering from it - I need some new knees!)

Chris

Have PM'd you on this.

Cheers

Tim

[Doug Lavoie]

Tim,
In the first thread picture, it is the top left plate (in green with the black isolator). I am sure that the bottom left (metal colour) would work as well.
Doug

[Tim Bell]

Originally Posted by Doug Lavoie

Tim,
In the first thread picture, it is the top left plate (in green with the black isolator). I am sure that the bottom left (metal colour) would work as well.
Doug

Doug

In that case, I am fairly sure I have one or the other of these spare.

I will have a look at the weekend.

Tim

[Doug Lavoie]

Tim,
Thank you for the help in this matter. Will wait until you contact me again.
Take care,
Doug