|
|
|
|
#1
13-08-17, 17:53
|
||||
|
||||
Best to POR them post rinse, that way they won't flash rust on you
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
|
#2
13-08-17, 18:56
|
||||
|
||||
|
There is a product here in Canada called "Hold Tight" You mix it in with your pressure washer water when you rinse the bare metal and it will provide a minimum of 72 hours protection from flash rusting, in practice it is usually twice that. I have used it when I "wet" blast with my sandblaster...it is pretty pricey here but well worth the price in my opinion.
John
|
|
#3
13-08-17, 19:27
|
||||
|
||||
|
Mind I am surprised the solution was still active after three years, usually its kaput after around six months depending on conditions.. (my findings anyway)
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
14-08-17, 18:39
|
||||
|
||||
|
Either way, it's done well !
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
