Front and rear Spring Bushings 5781 or CO1T-5781-A and 5781 or CO1T-5781-A

[Mike K]

Years ago i used to buy the bushes from Jacobs spring works in Oakleigh but they are probably long gone .

It's often the case that the spring eye is not a perfectly circular shape , the eye can be worn to a oval shape or it may have been originally manufactured slightly out of round which makes installing a new round bush a difficult job.

If you have access to a lathe you can machine some new bushes to suit your springs. Measure each spring eye dimension and then make each bush to suit each eye.

You could fit a bronze liner into the machined steel bush , make the bronze liner thicker than required, press it in, then bore it to suit the pin diameter.