For Sale: M8 armoured car bits and pieces for sale

[BCA]

Hello Darryl,
I spotted the "fan tunnels" for the radiator on your list. Do you mean the left and right radiator shrouds? I have the diffusers but am missing the driver side shroud for my M20 restoration. I could use a better right side shroud also.
I recall seeing you describe some parts you received from Europe and in the phots were a pair of shrouds that looked pretty good. Perhaps these are the ones you are offering?
Regards, Brian

[Big D]

Hi Brian

Poor choice of words on my part, sorry. I only have the one set of shrouds and I need both unfortunately.

[Big D]

Hi all

Here is another wee item to add to the list. These are NOS taillight plugs for the M8 and M20 armoured car. It is NOS but I opened the pack just to confirm what they are. Am asking $12 USD plus the ride there. Postage to the US is likely to be about $10 USD. Please PM if interested.

[Big D]

Hi all,

I have some more parts left over from my M8 restoration. Asking prices are in USD, and exclude the ride there. It is a big job to photograph everything so if you are interested in something, let me know and I’ll photograph it or provide more details. I realise I am a fair way away so hopefully the prices reflect that. If you are interested in anything and want to make an offer, feel free. Note that I won’t be able to ship the goods until the end of our national COVID19 lockdown which is hopefully 3 -4 weeks away:

• .50 cal machine gun turret elevator mount. Good condition = $1200
• Hercules Oil pump repair kit = $30
• Fan pulley wheel. Good condition = $50
• Fan pulley adjuster. Good condition = $50
• Hercules NOS JXD sump gaskets = $10 each
• Fuel pump to carb NOS fittings. Part A-284086 = $3 each
• Hercules JXD oil pump repair kit = $80
• Hercules JXD oil pump idler gear. NOS = $20
• Pinion seal. NOS. Part number A-283830 = $20
• Steering sector to hull oil seal. NOS. Part number G136-6884079 = $20
• Clutch slave cylinder hose. NOS = $20
• Clutch hydraulic tube, connects flexible line to elbow in hull = $10
• Clutch pressure plate = $40
• Clutch disc = $40
• Clutch master cylinder push rod = $20
• Carburettor. Needs rebuild = $200
• Fuel pump. Needs rebuild = $150
• Fan diffusers for the radiator. New reproduction = $150 for the pair
• Radiator mounts. Original = $20 for the pair
• Fuel tank shroud end covers. Some small holes but should clean up = $20 pair
• Ignition coil = $60
• Hercules engine tappet covers = $10
• Starter motor spacer adaptor = $50
• Engine mounts. Some pitting but useable = $20 for the pair
• Distributor shaft end gear. NOS = $20
• Distributor. French made. No points, some surface rust inside. Repairable = $30
• Starter solenoid. Working = $50
• Generator repair kits. NOS = $25 each
• Generator support plate = $50
• Circuit breakers for Generator. NOS = $20 each
• Primer pump = $50
• Automatic choke = $30
• Gear shift lever = $40
• Gear shift lever rod pieces. Repro? = $30
• Gear shift lever housing. Has cutaway top = $50
• Transfer case operating levers = $10 each
• Transfer case operating lever mounting screws = $5 each
• Gear shift lever housing. Corrosion damage around base = $10
• Prism box = SOLD
• Throttle master cylinders. All for rebuild = $50 each
• Torque rod ends = $50 each
• Wheel nuts = $10 each
• Turret seat frame front mounting yoke = SOLD
• 37mm breech block cam= TBC
• 37mm breech block springs= TBC
• .30 cal belt top guide = TBC
• Gun firing cable foot mount. Base is a bit bent but useable = $25
• 37mm travel lock bracket = TBC
• 37mm bore brushes = $15 each
• 37mm/.30cal firing pedal = SOLD
• 37mm rack top= $10
• Hydrovacs and parts = TBC
• Hydrovac line to brake. NOS. Part number GAKB248….= $10
• Drag link. NOS = $120
• Shock absorber mounts = $20
• Brake backing plate. Will require some straightening = $15
• Handbrake adjusting pins = $10
• Handbrake shoe = $50
• Axle grease seals = $4 each
• Brake T connections. Well used = $5 each
• Brake backing plate. Appears in good condition = $30
• Brake slave cylinder caps, requiring restoration = $10 adjustable/$5 for fixed
• Brake adjustment locking plate= $5
• Brake shoe securing bolts with springs. Good condition= $10
• Brake master cylinder. No piston etc = $25
• Drive shafts and drive shaft connections = TBC
• Shock absorber mounting rubbers = $5 each
• Turret mechanism. Mainly complete, plus extra parts = $300
• Steel skirt for turret. 600mm long, for turret repairs = $20
• Protectoscope box holder bolt. Working well = $10
• Latch for hull/hatch visor. Looks a little rough, but works = $10
• Sponson cover. French made. Rough but repairable= $20
• Instrument panel circuit breaker backplate = $5
• Dashboard Silent blocs = $20 for set
• BC-606 Interphone box. Internals altered by a previous owner = $15
• Battery cable 40cm long. NOS = $50
• White terminal box = $30
• Tail light sockets. NOS. Part number G103-2386846 = $10 each
• Pedestal light connectors. NOS = $5 each
• IN121 insulator. NOS = $15
• HS30 earphones = TBC
• T-30 microphones = TBC
• SW-141 switches = TBC
• Radio terminal box. No lid = $10
• Steel conduit, shunt box to T connection. Bent but should straighten = $10
• Dashboard wiring harnesses. NOS = $30 each
• Speedometers = $60
• French temperature gauge. Tested and works with sender A297237 = $80
• Oil pressure gauge. NOS. Stewart Warner, Model 405356 = $80
• Assorted speedometers, ammeters, fuel, temp and oil pressure gauges = TBC

I also have pistons, bearings, valves, bellhousings, engine covers, transfer case parts etc.

Please PM if interested. Payment by Paypal is okay.

[Big D]

Hi all,

Here is an updated list of M8 and M20 parts I have left over for sale. Rather than list a price, let me know if you are interested in anything and I’ll first work out a freight price and if you are happy with that, then you can make me an offer. I’m not fussed about making money and I’d rather the stuff just gets used. I’m a long way away so I know freight is a factor.

I've attached some photos but can send more if required:

• .50 cal machine gun turret elevator mount
• Brake shoes. NOS and used.
• Map clips. NOS.
• Pedestal light locking pin. May be for H/T but works in M8.
• Brake line covers
• Clutch and brake pedal assembly
• Radio cable tube/conduit
• Voltage regulator. Not working.
• Exhaust header. Needs repair.
• Sponson plates
• Gearshift selector rod.
• 37mm and .30 cal cable mount for seat frame.
• .50 cal gun barrel turret support
• Front engine mount cushions. Rough.
• Front engine mount cushion retainers. Rough.
• Rear engine steel mounts. Rough but repairable
• Oil can bracket. Original
• Throttle salve cylinder mount. Repro.
• Master switch front.
• Throttle reservoir.
• Front axle brake guard.
• Shock absorber mounts.
• Black out light mount. Repro.
• Parking brake and parts
• Hercules Oil pump repair kit
• Fan pulley wheel and adjuster casting
• Fuel pump to carb NOS fittings. Part A-284086.
• Hercules NOS JXD (?) oil pump idler gear
• Pinion seal. NOS. Part number A-283830.
• Carburettor. Needs rebuild.
• Fuel tank enclosure (x2)
• Fuel tank mounts. Originals.
• Ignition coil
• Hercules engine tappet covers
• Distributor shaft end gear
• Distributor. French made. No points, some surface rust inside. Repairable
• Circuit breakers for Generator. NOS
• Primer pump
• Gear shift lever rod pieces. Repro?
• Gear shift lever housings. Both are rough
• Transfer case operating levers
• Transfer case operating lever mounting screws
• Throttle master cylinders. All for rebuild
• Clutch slave cylinders. All for rebuild
• Torque rod ends
• Wheel nuts
• .30 cal belt top guide
• Gun firing cable foot mount. Base is a bit bent but useable.
• 37mm travel lock bracket = TBC
• 37mm rack top
• Hydrovacs and parts
• Drag link. NOS
• Rubber shock absorber mounts
• Brake backing plates. Will require straightening
• Handbrake adjusting pins
• Handbrake shoe
• Axle grease seals
• Brake T connections. Used
• Brake wheel cylinders. Requiring restoration
• Brake wheel cylinder caps. Requiring restoration
• Brake adjustment locking plate
• Brake shoe securing bolts with springs.
• Brake master cylinder. No piston
• Turret mechanism. Mainly complete, plus extra parts
• Steel skirt for turret. 600mm long, for turret repairs
• Protectoscope box holder bolt. Working well
• Latch for hull/hatch visor. Looks a little rough, but works
• Sponson cover. French made. Rough but repairable
• Instrument panel circuit breaker backplate
• Dashboard Silent blocs
• Steel conduit, shunt box to T connection. Bent but should straighten
• Dashboard wiring harnesses. NOS
• Speedometer
• French temperature gauge. Tested and works with sender A297237 = $80
• Oil pressure gauge. NOS. Stewart Warner, Model 405356 = $80

Please PM if interested.

[Big D]

More photos.

[Big D]

And again...